Installation Instructions - GUTMANN Sombra Montageanleitung

Gas Cooktops
Load of one cooking area max. 3.9 kW
Load of all cooking areas max. 11.3 kW
Subject to technical changes!

Installation Instructions

Wall Hood
Electrical
Connection
Performance (LED)
Rod Operation
Image: Solo Island Hood
(For exhaust operation) Prepare a suitable
exhaust airflow in the wall/ceiling. Before
installing your wall hood, the midpoint for the
center hole for the exhaust through the wand
Exhaust Hose
Installation Flange
with Attachment Hole
(with the exception of recirculation hoods) as
well as the screw anchor holes for the wall
attachment flange should be drawn using the
installation stencil provided. The distance
between the upper edge of the tower to the
midpoint of the center hole is 140mm. The
upper tower can be installed flush to the
ceiling or as per the desired height with
distance to the ceiling. In the event of exhaust
air being fed through the ceiling, the upper
tower should, of course, be installed flush to
the ceiling. The distance from the wall to the
midpoint of the ceiling duct is 240mm. Please
bore the holes shown for the wall flange and
insert the screw anchors. Install the wall
flange using the machine screws provided.
Now place the hood in the desired position
(adjustable height of the overall hood height
630-830mm / 800-950mm). The upper tower
is provided with a drilling stencil with which
you see the exact position of the hole (remove
drilling stencil after drilling).Please drill three
attachment holes with a hole diameter of
6mm.Now please attach the exhaust hose
en