GUTMANN Sombra Montageanleitung Seite 25

please insert the low voltage wiring for the
light diodes in the upper tower into the
controls. First hang the safety chain between
the glass holder and grease filter. Then please
install the grease filter by turning it clockwise
(recirculating hoods are provided with an ad-
ditional active carbon filter). Remove the
provisional tape fastening and lower the
under tower onto the hood. The masking
conduit must be pulled over the wall
attachment and hooked. Conduct function
test.
The exhaust hose must always be laid out in
a manner in which it is not bent.
Installation Instructions
Island Hood
Please determine the position above the
cooking area before installing your island
hood. Determine the midpoint of the tower
(exhaust airflow through the ceiling) as well
a
b
c
as the screw anchor holes for attachment to
the ceiling from the stencil provided. Please
drill the holes for the installation of the upper
tower (hole diameter 10mm) and insert the
screw anchors provided. Attach the exhaust
hose (with the exception of recirculation
en