BESAFE iZi Kid Bedienungsanleitung Seite 2

13 14 19
21
15 16
22
17
18
24
20
26
28
23
30
25
8
Thank you for choosing BeSafe iZi Kid i-Size
! It is important that you read this user manual BEFORE installing your seat.
Incorrect installation could endanger your child.
27
! Vital information
• It is NOT ALLOWED to mount the seat in a front passenger seat
WITH AN ACTIVATED AIRBAG.
• iZi Kid i-Size can only be installed rearfacing with the ISOfix
anchorage in a car equipped with ISOfix anchorage points.
• iZi Kid i-Size is approved for children with a stature height from 61
to 105 cm, rearfacing with a max. weight up to 18 kg.
• Read the car list to find out whether your car model is approved to use the seat.
• The harness straps must always be locked when the child is in the seat.
• The harness straps must be tightened without slack and not twisted.
• The shoulder pads contain magnets. Magnets can influence electronic
equipment such as pacemakers.
29
• The floor support must always be used. Make sure that the floor support is fully
pushed down until it touches the floor of the vehicle in front of the seat and that
the indicators on the floor support are always showing green.
• We recommend that this seat is used only for children who can sit upright, so
not younger than 6 months.
• For children under 1 year and/or under 10 kg weight, we recommend that the
most reclined sitting position and the body hugger and baby cushion (extra
available accessory) are used.
• Remove the baby cushion (extra available accessory) when the child is older
than 1 year.
31
• Remove the body hugger when the child is older than 2 years.
• When the child weighs over 18 kg or the shoulder height grows above the
highest position of the shoulder straps, the child must change to a seat, suitable
for children with a weight above 18 kg.
• After an accident, the seat must be replaced. Although it may look undamaged,
if you were to have another accident, the seat may not be able to protect your
child as well as it should.
• Prevent the seat from becoming trapped or weighed down by luggage, seats
and/or slamming doors.
• Before every use, make sure the harness is not damaged or twisted.
• Make sure you can fit no more than one finger between the harness and your
baby (1 cm).
• DO NOT attempt to dismantle, modify or add any part to the seat. Warranty will
be void if non-original parts or accessories are used.
• Never leave your child unattended in the seat.
• Make sure all passengers are informed about how to release your child in case
of emergency.
• Make sure luggage or other objects are properly secured. Unsecured luggage
9
may cause severe injuries to children and adults in case of accidents.
• Never use the seat without the cover. The cover is a safety feature and may
only be replaced by an original BeSafe cover.
• Do not use any aggressive cleaning products; these may harm the
construction material of the seat.
• BeSafe advises that child seats should not be bought or sold second-hand.
• KEEP this user manual for later use with the seat.
• DO NOT use the seat for longer than 7 years. Due to ageing, the quality of the
material may change.
• When the child seat is mounted in the car check all the areas where the child
seat might touch the interior. We recommend using a (BeSafe) protection
cover in these places to avoid cuts, marks or discolouration to the interior of
the vehicle, especially in vehicles with leather or wooden interiors.
• If in doubt, consult either the car seat manufacturer or the retailer.
Preparing to install
• Adjustable head rest (1a)
• Shoulder straps (2x) (1b)
• Harness buckle (1c)
• Body hugger (1d)
• Front brace (1e)
• Central adjuster (1f)
• Reclining lever (1g)
• Ratchet for front brace (1h)
• Cap ISOfix connector (2x) (1i)
• Switch for ISOfix connectors (2x) (1j)
• Floor support (1k)
• Height adjuster floor support (1l)
• Floor support height indicator (1m)
• Release handle head rest (2a)
• Floor support position indicator (2b)
• ISOfix car anchorage (2x) (3a)
• ISOfix insertion clips (2x) (bottom side) (3b)
• ISOfix connectors (2x) (3c)
• ISOfix indicators (2x) (3d)
• ISOfix release button (2x) (3e)
Rearfacing: ISOfix installation
1. It is NOT ALLOWED to mount the seat in a front passenger seat WITH AN
ACTIVATED AIRBAG.
2. The seat can only be installed rearfacing in vehicles equipped with ISOfix
anchorage points.
3. When mounting in the back seat of the vehicle, push the front seat of the
vehicle forward as much as possible.