Herunterladen Inhalt Inhalt Diese Seite drucken

Safety Notice - Vitavia HERA 4500 Montageanleitung

Vorschau ausblenden Andere Handbücher für HERA 4500:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

suring the diagonals.
Loosely connect the door wheels (6049) and
door jump clips (6039) to bottom bar (6117)
using nut (1002), bolt (6046) and washers
(6051) (5.2).
Connect the plastic door guides (6057) onto
top bar (6114) with screws (6062) (5.4).
The door can now be positioned in the house.
Insert the plastic door guides (6057) into the
channel in eave bar (6110) (5.6) and then
lower the wheels onto the door track on sill bar
(6102) (5.7) (5.8). Hook the door jump clips
(6039) under the lip on (6102) and tighten the
door wheel bolts (6046) (5.7).
6. VENT
Trim the rubber seal in louvre sides (9523) and
(9524) to length.
The louvre can only be fi tted into the bottom of
any side in a section that does not already
have a diagonal brace (6107) fi tted.
Connect louvre sides (9523) and (9524) to
corner bar (6022) and middle bar (6013) by
inserting the cropped head bolts (2001) into
the bolt channels in these bars (6.2) (6.4).
Open the vents and slide panes (3) into place
(6.3). Bend the end of the pane guides against
the panes to fi x them securely in place.
7. GLAZING
Please note the already mentioned safety
precautions.
Press the glazing seals (1020) onto all alumini-
um profi les (7.2) and cut to length.
Using the step ladder begin glazing the roof
by standing inside the building and working
through the free roof spaces.
Secure the panes using glazing spring clips
(1011) (7.3) (7.4) and glass retaining clips
(1012) (7.5). Ensure that the top edge of pane
(5) is tucked under the bottom edge of pane
(6) with (1012) between them (7.5), and that
the lower edge of pane (5) sits in the recess in
the eaves.
On the sides please begin from the bottom.
Now tighten the bolts connecting the house to
the foundation.
FINISHING
If desired, it is possible to seal the greenhouse
at the edges using silicon. Silicon is not in cluded.
Place the warning label inside the house.
014.02.0902
A full range of greenhouse accessories, to
help you make the most of this product, is
available from your stockist. Please inform
yourself as to the possibilities.

SAFETY NOTICE

In the event of high wind conditions, close the
door and all vents.
In the event of heavy snowfall, clear the roof of
the building or take suitable measures to sup-
port the roof. Heat the building in winter.
COMMENTS
For the complete protection of your new
green house, we advise you to include it in
your house insurance. Please take note of
possible building rules relating to the positio-
ning of greenhouses.
Please stick the included greenhouse model
label onto the door bar (6114) after success-
fully assembling this product. This information
is important in the event that replacement
parts are later required.
Please keep these Assembly Instructions in a
safe place, for future reference!
Our policy is one of continuous improvement
and we reserve the right to change the specifi -
cations without prior notice.
5

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis