SOLAC RA8019 Gebrauchsanleitung Seite 9

10. Wheel nut
11. Wheels
12. Cable winder
13. Towel-rack supports
14. Metal towel-rack guides
15. Flat towel-rack base
General notes
• Unpack the appliance and remove all traces of the packaging that may re-
main in between the parts of the radiator.
• Make sure the radiator is not damaged and the plug is not deformed.
Installing the wheels
• The radiator is packed with its wheels removed. Please ensure they are cor-
rectly installed before using the appliance.
• Remove the curved support, the foot rail with the wing nuts and the wheels.
Carefully turn the radiator upside down on a carpet or any other soft surface,
in order to avoid damaging the protective layer.
• Unscrew the wing nuts (9) from the curved support. Place one of the curved
supports between the first and second elements, insert the foot rail (8)
through the openings between them and use two wing nuts to hold the
two parts together. Fig. 1
• Unscrew the wheel nuts and insert the wheels in the openings at the ends
of the foot rail (8). To hold the wheels in place, screw the nuts (10) back on.
Fig. 2
• Repeat this operation between the last two elements to install the remain-
ing two wheels.
Fitting the towel rack
1. Insert one of the metal guides in each of the holes at the ends of one of
the supports (Fig. 3).
2. Insert the flat metal base in the central space in the support (Fig. 4).
3. Join the second support to both metal guides and the flat base (Fig. 5).
4. Fit the bottom of each support to the top of the radiator elements (Fig. 6).
USER INSTRUCTIONS
• Before using the appliance for the first time, make sure the mains voltage
matches that of your radiator. Check also that the plug is suitable for the
electrical load of the mains socket.
• Only connect the radiator to a socket that has a ground connection.
1.1 CONNECTION
• Plug the plug into the socket. Turn the power selector (4):
Radiador RA8021-19-17-OK 9
9
12/5/06, 10:59:15