Standard Operations - Hach LANGE BIOGAS Titrator Manager Basis Bedienungsanleitung

Standard Operations

Overview
The interface of the BIOGAS Titration Manager has been specially designed to clearly guide you
through every step of the programming and running of the analyses, whether you are a supervisor or
a routine user.
An important part of this interface is to check and control the presence of different elements
necessary to run the defined application.
Use of alphanumerical keypad
Figure 3 Alphanumerical keypad
1 Alphanumeric keypad to enter data and parame-
ters on the same principle as mobile telephones.
These keys can also be used for quick access to
the different menus.
2 Del key: deletes the character on which the cur-
sor is positioned.
Operator may end the analysis before the max.
titration time or the max. volume have been
reached, if he considers his analysis finished.
Calculations are performed.
3 Esc key: returns to the previous screen.
4 Print key: prints the data concerning the screen
displayed.
1
2
3
4
5
6
7
5 Stop key: stops an analysis or a burette function.
Press this key for 3 seconds in the Main window
to gain access to the setup parameters.
6 RIGHT, LEFT, UP, DOWN arrow keys are used
to move to different options within the menus.
7 Validation/Confirm key
message or a function asked for by the user.
: confirms a data entry, a
?
English 65