Hold wall bracket up to wall in a suitable loca-
tion and mark 6 mounting holes with a pencil.
Drill mounting holes as marked and insert wall
plugs into holes to be flush with surface.
Attach wall bracket to wall using the 6 screws.
Ensure frame (1) is firmly in position
using the Article
Hang bicycles on the wall bracket notches. Wall
bracket holds up to 2 bicycles. Release latch
(3) (Fig. B) and fold frame when bicycle wall
bracket is not in use.
Care and Storage
The bicycle wall bracket should be cleaned
regularly with warm water and pH-neutral soap,
then wiped dry with a cloth. Avoid harsh
chemical agents (e.g. solvents).
Please dispose of the product and packaging in
an environmentally friendly manner, separating
different materials for recycling as required! Dis-
pose of this item through an authorised disposal
company or through your local waste disposal
facilities - ask your local authority for information
if further guidance is required. Ensure that you
comply with all regulations currently in force.
The product was produced with great care and
under constant supervision. You receive a three-
year warranty for this product from the date of
purchase. Please retain your receipt.
The warranty applies only to material and
workmanship and does not apply to misuse or
improper handling. Your statutory rights, espe-
cially the warranty rights, are not affected by this
With regard to complaints, please contact the
following service hotline or contact us by e-mail.
Our service employees will advise as to the
subsequent procedure as quickly as possible.
We will be personally available to discuss the
situation with you.
Any repairs under the warranty, statutory gua-
rantees or through goodwill do not extend the
warranty period. This also applies to replaced
and repaired parts.
Repairs after the warranty are subject to a
Service Great Britain
0871 5000 720 (£ 0.10/Min.)