BaByliss C1201E Bedienungsanleitung Seite 8

• Plug in the appliance, switch on and select the desired temperature
using the 0-I-II switch. See table below:
Temperature
(I): 210°C
(II): 230°C
• The indicator light comes on and will start to flash.
• The indicator light will stop flashing when the appliance has heated
up to the selected temperature. The appliance is now ready to use; the
indicator light will stay on.
• Select the time setting depending on the desired curl effect. For loose
curls, select the minimum time setting. For tighter curls, select the
maximum time setting. Please refer to the table below:
8 8 seconds
10 10 seconds
12 12 seconds
• Select the adjustment of the direction of the
curl, according to the desired result:
- For an even, more sophisticated style, adjust
the appliance to the "L" (left) position, to
create curls to the left side of the head. Then
adjust the appliance to the "R" (right) posi-
tion, to create curls on the right side of the
head.
- For a softer, more natural style, adjust the
appliance to the "A" (automatic) position.
This adjustment will create alternating
curls, first in one direction and then in the
opposite direction.
Precautions for use
• Ensure that hair is dry.
• Clip the upper layers to the top of your head and start working on the
layers underneath.
• Separate a section of hair no wider than 3 cm. Ensure the section is
thoroughly combed through.
Time Audio beep indicator
Hair type
Fine, bleached and/or damaged hair
Normal, thick hair
wavy or dyed
3 beeps
4 beeps
5 beeps
8
Curl effect
Loose waves
Soft curls
Defined curls