Service Life; Recycling Instructions - GEV Flammex FMG 4313 Bedienungsanleitung

cleaning agents or solvents) be used on the alarm or near to the alarm. The alarm must not be painted or
varnished! Take care to ensure than no moisture penetrates the device.

Service life

The electrochemical sensor is subject to an ageing process. The service life of the sensor is therefore
limited to approximately seven years. The sensor cannot be replaced. Therefore, please replace the entire
alarm no later than 7 years after it is first commissioned. Please note the date when the alarm was first
commissioned on the enclosed sticker (fig. 10) with a permanent marker.
Notes regarding batteries and battery packs
Used batteries must not be disposed of with unsorted household waste. Used batteries must be
recycled and may be returned free-of-charge to the place of sale. Batteries contain substances which
are harmful to the environment and to human health and must therefore be disposed of correctly.

Recycling instructions

This device must not be disposed of with unsorted household waste. Owners are required by law to
correctly dispose of used devices. Contact your local town council for more information.
Trigger threshold in accordance with EN 50291-1: 2010 + A1: 2012
CO concentration in the air
30 ppm
100 ppm
300 ppm
Technical data
Model name
Battery operation
Certification
Alarm volume
Storage/transport temperature
Permissible humidity
Protection type
Dimensions
Alarm service life
Technical and design features may be subject to change.
Alarm triggered no later than
after 120 minutes
after 10–40 minutes
after less than 3 minutes
FMG 4313: Device type B
2x 1.5-V alkaline (AA/Mignon) Energizer E91
EN 50291-1: 2010 + A1: 2012
approx. 85 dB/1 m
-20°C... +50°C
30 %... 95 %, non-condensing
IP X20D
W 120 x H 80 x D 38 mm
approx. 7 years
11