Safety Instructions - Renkforce iCR6307AS RIOTEC 1D Bedienungsanleitung

Operating instructions
iCR6307AS RIOTEC 1D Barcode scanner
Bluetooth /USB OTG
®
Item no. 1462883
Intended use
Use this barcode scanner for quick and reliable scanning of conventional 1D barcodes, such as UPC, EAN or
ISSN barcodes. The built-in rechargeable battery provides enough power for 20,000 – 25,000 barcode scans. The
barcode scanner has a wireless range of 100 m, making it ideal for on-the-go use in shops, warehouses or offices.
Data is transmitted via Bluetooth Class 1. You can also transfer data to an OTG-capable mobile device using a
USB OTG cable. The scanner has a 1 MB internal memory, which can store up to 65,000 EAN 13 barcodes and
send them to an OTG or Bluetooth -capable mobile device.
®
It is intended for indoor use only. Do not use it outdoors. Contact with moisture, e.g. in bathrooms, must be
avoided under all circumstances.
For safety and approval purposes, you must not rebuild and/or modify this product. If you use the product
for purposes other than those described above, the product may be damaged. In addition, improper use can
cause hazards such as short circuiting, fire, electric shock etc. Read the instructions carefully and keep them.
Make this product available to third parties only together with its operating instructions.
This product complies with the statutory national and European requirements. All company names and
product names are trademarks of their respective owners. All rights reserved.
Bluetooth is a registered trademark of Bluetooth SIG, Inc.
®
Delivery content
• Barcode scanner
• Charging station with USB cable
• Smartphone holder
• Micro USB cable
Latest operating instructions
Download the latest operating instructions via the link www.conrad.com/downloads or scan the QR code
shown. Follow the instructions on the website.
Explanation of symbols
An exclamation mark in a triangle indicates important instructions in this operating manual that
absolutely have to be observed.
The arrow symbol indicates specific tips and advice on operation.

Safety instructions

Read the operating instructions carefully and especially observe the safety information. If you
do not follow the safety instructions and information on proper handling in this manual, we
assume no liability for any resulting personal injury or damage to property. Such cases will
invalidate the warranty/guarantee.
a) General
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. This may become dangerous playing
material for children.
• Protect the product from extreme temperatures, direct sunlight, strong jolts, high humidity,
moisture, flammable gases, vapours and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of operation and protect it
from any accidental use. Safe operation can no longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts or a fall even from a low height can damage
the product.
• Also observe the safety and operating instructions of any other devices which are connected
to the product.
• Risk of injury! Do not point the product at people or animals.
• Consult an expert when in doubt about operation, safety or connection of the device.
• Maintenance, modifications and repairs are to be performed exclusively by an expert or at a
qualified shop.
• If you have questions which remain unanswered by these operating instructions, contact our
technical support service or other technical personnel.
• Attention, LED light:
- Do not look directly into the LED light!
- Do not look into the beam directly or with optical instruments
• 3 x screws
• Mounting plate
• Quick start guide
• Operating instructions
b) Rechargeable batteries
• The rechargeable battery is permanently built into the product and cannot be replaced.
• Never damage the rechargeable battery. Damaging the casing of the rechargeable battery
might cause an explosion or a fire!
• Never short-circuit the contacts of the rechargeable battery. Do not throw the battery or the
product into fire. There is a danger of fire and explosion!
• Charge the rechargeable battery regularly, even if you are not using the product. Due to the
rechargeable battery technology being used, you do not need to discharge the rechargeable
battery first.
• Never charge the rechargeable battery of the product unattended.
• When charging, place the product on a surface that is not heat-sensitive. It is normal that a
certain amount of heat is generated during charging.
Operating elements
5
4
3
2
1
Charging the barcode scanner
The battery must be charged before using the product for the first time. The scanner does not
need to be switched on in order for it to charge. However, the charging status is not shown when
the scanner is switched off.
The LED indicator (9) blinks in orange when there is insufficient battery power remaining. Charge the battery
straight away. If the product has turned itself off (sleep mode), fully charge the battery before turning it on
with the trigger (2). To charge the battery, follow the steps below:
• Turn on the barcode scanner using the Push ON button (10), which is located on the bottom of the
scanner. Use a sharp object (such as the tip of a pen) to push the button.
• Connect the USB cable on the charging station (1) to a USB port on a computer or USB power adapter.
Place the charging station on a flat surface.
• Insert the barcode scanner into the charging station. Ensure that the contacts on the bottom of the scanner
are clean and connected to the contacts on the charging station.
• Move the O C sliding switch (7) to the "C" position.
• The battery level indicator (9) blinks to indicate that the battery is charging. Depending on the remaining
battery level, a full charge takes 4-5 hours.
• The LED indicator will change to a steady orange when the battery is fully charged.
Disconnect the product from the USB power source when the LED indicates that the battery is
fully charged. The device is now ready for use.
The barcode scanner does not automatically enter sleep mode when the battery is charging.
• The charging station can also charge an Android mobile device that is connected to the barcode scanner
using the USB cable provided. For details on how to connect a mobile device, see "Connecting the
mounting plate, smartphone holder and mobile devices".
Battery status information
You can view battery status information on a connected mobile device. To configure the display settings,
scan the corresponding configuration barcode in the "Battery information" section in the quick start guide
that comes with the product.
• To display battery status on your mobile device, scan the first configuration barcode.
• To update the battery status information automatically, scan the second configuration barcode ("Enable").
Your mobile device will then display the latest battery status every 30 seconds.
• To stop displaying battery status information, scan the third configuration barcode ("Disable").
• The battery status is displayed in Arabic numerals. Refer to the following list for information on the battery
level represented by each number.
4 = 80 % - 100 %
3 = 55 % - 80 %
2 = 30 % - 55 %
1 = 10 % - 30 %
0 = Less than 10 % (The battery level is very low; charge the battery immediately).
Connecting the mounting plate, smartphone holder and mobile devices
You can attach a suitable mobile device to the scanner by following the steps below (tablets are not
supported).
• Connect the micro USB connector on the USB cable that came with the product into the micro USB port (7)
on the scanner.
• Guide the USB cable through one of the slots on the scanner head. Connect the cable to a mobile device
that supports USB OTG. For more information, refer to the quick start guide that came with the product.
If you move the O C sliding switch (7) to the "C" position, the connected mobile device is also
being charged whenever the barcode scanner is charged.
1 Charging station
6
2 Trigger
3 Scan window
7
4 Mounting plate
8
5 Smartphone holder
9
6 Smartphone (not included, for illustration purposes
only)
7 Micro USB port (hidden, not shown)
8 O C sliding switch (hidden, not shown)
10
9 LED indicator (hidden, not shown)
10 Push ON button (hidden, not shown)