Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Operating instructions
1D Wireless laser barcode scanner
Item no. 407979
Intended use
Use this wireless barcode scanner to quickly and reliably read all common barcode types such as UPC,
EAN and many more. The built-in rechargeable battery lasts up to 20,000 readings. The bar code scanner is
ideally suited for use in shops, warehouses or offices.
It is intended for indoor use only. Do not use it outdoors. Contact with moisture, e.g. in bathrooms, must be
avoided under all circumstances.
For safety and approval purposes, you must not rebuild and/or modify this product. If you use the product
for purposes other than those described above, the product may be damaged. In addition, improper use can
cause hazards such as short circuiting, fire, electric shock etc. Read the instructions carefully and keep them.
Make this product available to third parties only together with its operating instructions.
This product complies with the statutory national and European requirements. All company names and
product names are trademarks of their respective owners. All rights reserved.
Delivery content
• Barcode scanner
• Charging/docking station with USB cable
• Barcode label
• Operating instructions
• Quick instructions
Latest operating instructions
Download the latest operating instructions via the link www.conrad.com/downloads or scan the QR code
shown. Follow the instructions on the website.
Explanation of symbols
The lightning symbol inside a triangle is used when there is a potential risk of personal injury,
such as electric shock.
An exclamation mark in a triangle indicates important instructions in this operating manual that
absolutely have to be observed.
The arrow symbol indicates specific tips and advice on operation.
Safety instructions
Read the operating instructions carefully and especially observe the safety information.
If you do not follow the safety instructions and information on proper handling in this
manual, we assume no liability for any resulting personal injury or damage to property.
Such cases will invalidate the warranty/guarantee.
a) General
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. This may become dangerous playing
material for children.
• Protect the product from extreme temperatures, direct sunlight, strong jolts, high humidity,
moisture, flammable gases, vapours and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of operation and protect it
from any accidental use. Safe operation can no longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts or a fall even from a low height can damage
the product.
• Also observe the safety and operating instructions of any other devices which are connected
to the product.
• The product is equipped with a class 1 laser.
• Never look into the laser beam and never point it at people or animals. Laser radiation can
seriously damage your eyes.
• Do not point the laser beam at mirrors or other reflective surfaces. The uncontrolled, reflected
beam may strike people or animals.
• Warning! This is category A equipment. This equipment can cause radio interference in the
living area; the operator can be asked to take appropriate measures in this case.
• Consult an expert when in doubt about operation, safety or connection of the device.
• Maintenance, modifications and repairs are to be performed exclusively by an expert or at a
qualified shop.
• If you have questions which remain unanswered by these operating instructions, contact our
technical support service or other technical personnel.
b) Rechargeable batteries
• The rechargeable battery is permanently built into the product and cannot be replaced.
• Never damage the rechargeable battery. Damaging the casing of the rechargeable battery
might cause an explosion or a fire!
• Never short-circuit the contacts of the rechargeable battery. Do not throw the battery or the
product into fire. There is a danger of fire and explosion!
• Charge the rechargeable battery regularly, even if you are not using the product. Due to the
rechargeable battery technology being used, you do not need to discharge the rechargeable
battery first.
• Never charge the rechargeable battery of the product unattended.
• When charging, place the product on a surface that is not heat-sensitive. It is normal that a
certain amount of heat is generated during charging.
Operating controls
1
2
3
4
8
1
Reader unit
2
Trigger
3
LED control indicator (barcode scanner)
4
USB cable
Charging the barcode scanner
• Before first use, fully charge the barcode scanner. Charging takes approx. 4 - 5 hours. You can charge the
product via the charging station (8).
• Make sure that your PC is turned off. Connect the USB cable (4) from the charging/docking station to a
USB port on your PC. Now turn on your PC.
• Push the power switch (6); the red LED control indicator (7) lights up.
• Turn the barcode scanner on by pushing the on/off button (5) with a pointed, blunt object. Three beeps
sound.
• Place the barcode scanner on the charging station.
• The LED control indicator (3) blinks during charging and remains lit when the rechargeable battery is fully
charged.
• Switch the charging station off by pushing the power switch (6), as soon as the battery is fully charged. The
red LED control indicator (7) will switch off.
• Please pay attention that the LED control indicator (3) on the barcode scanner is switched off during
charging, if the power-saving mode has been activated.
When the battery power is low, the LED control indicator (3) begins blinking, accompanied each
time by a beep. After a short time, the barcode scanner will turn off automatically. Recharge the
battery before further use.
Operation
Never point the reader unit (1) at persons or animals. Lasers are dangerous.
• Before using the barcode scanner, read all the instructions pertaining to setting up the device contained
in "Barcode scanner configuration".
• Make sure that your PC is turned off. Connect the USB cable (4) from the charging/docking station (8) to
a USB port on your PC. Now turn on your PC.
• Turn on the barcode scanner by pushing the on/off button (5). Three beeps sound and the LED control
indicator (3) blinks briefly. The barcode scanner now automatically connects to the charging/docking
station. The LED control indicator goes out.
• The LED control indicator (3) lights up and remains lit if the barcode scanner is disconnected
from
the
charging/docking
station.
docking station. First disconnect the USB plug from your PC's USB port and plug it back
in. Now restart the barcode scanner by turning it off and then on using the on/off button.
One by one, scan the 3 barcodes located on the label on the bottom of the charging/docking station. The
3 barcodes are located on the provided barcode label. If you do not complete these steps within 1 minute,
begin over again.
• On your PC, open a document you want to scan the barcode to. The barcode will be inserted at the
cursor's position.
• Hold the reader unit (1) at a sufficient distance and correct angle (about 38°) to the barcode. Depending
on the size and type of barcode, you may need to adjust the distance. View the following illustration, they
depict the reader unit's correct position.
• Pull the trigger (2) to scan the barcode. A beep sounds and the LED control indicator (3) lights up green
if scanning was successful. The barcode is scanned automatically. If the barcode cannot be scanned, the
LED control indicator lights up red.
Make sure that the barcode you wish to scan is clean and fully visible.
Hold the scanner at the correct angle and distance. Hold the reader unit horizontal to the
barcode.
Check the settings each time you turn on the device to prevent incorrect readings.
5
Bottom of barcode scanner
7
6
5
On/off button (barcode scanner)
6
Power switch (charging/docking station)
7
LED control indicator (charging/docking station)
8
Charging/docking station
Connect
the
barcode
scanner
to
the
charging/
Werbung
