Renkforce iCR6307AS RIOTEC 1D Bedienungsanleitung Seite 6

Setting symbologies
Setting
Setting symbologies 1D - 1
Industrial 2 of 5
Set the Minimum Length to 6 digits
ENABLE / DISABLE
The length of the Industrial 2 of 5 symbology can be adjusted to a minimum of two digits. Scan the
barcodes 1-6 in the final section of the quick start guide (page 7) to set the minimum length of an
Industrial 2 of 5 barcode to two (left-hand column) or six (right-hand column).
ISSN ENABLE / DISABLE
ISBN ENABLE / DISABLE
Interleaved 25 ENABLE / DISABLE
Matrix 25 ENABLE / DISABLE
Setting symbologies 1D - 2
GS1-Databar (RSS) ENABLE / DISABLE
GS1-Databar (RSS-Limited) ENABLE / DISABLE
GS1-Databar (RSS-Expand) ENABLE / DISABLE
CODE 93 ENABLE / DISABLE
Setting symbologies 1D - 3
Industrial 25 ENABLE / DISABLE
MSI ENABLE / DISABLE
CODE 128 ENABLE / DISABLE
GS1-128 UCC/EAN-128 ENABLE / DISABLE
CODE 11 ENABLE / DISABLE
CODABAR ENABLE / DISABLE
CODE 39 ENABLE / DISABLE
Setting symbologies 1D - 4
EAN-8 ENABLE / DISABLE
EAN-13 ENABLE / DISABLE
UPC-E ENABLE / DISABLE
UPC-A ENABLE / DISABLE
CODE 39 FULL ASCII ENABLE / DISABLE
CODE 39 Transmit Start/Stop Character ENABLE /
DISABLE
Care and cleaning
• Always unplug the charging cable before cleaning the product.
• Never use aggressive detergents, rubbing alcohol or other chemical solutions, as these could damage the
casing or even impair the functioning of the product.
• Use a dry, lint-free cloth to clean the product. Do not press too hard on the surface when cleaning to avoid
scratch marks.
• Dust can be easily removed using a clean long-haired brush.
• Do not immerse the product in water.
Declaration of conformity (DOC)
Conrad Electronic SE, Klaus-Conrad-Straße 1, D-92240 Hirschau hereby declares that this product
conforms to the 2014/53/EU directive.
Click on the following link to read the full text of the EU declaration of conformity: www.conrad.
com/downloads
Select a language by clicking on a flag symbol and enter the product order number in the search
box. You can then download the EU declaration of conformity in PDF format.
Function
Enable/disable Industrial 2 of 5 (2 or 6-digit length)
Enable/disable ISSN
Enable/disable ISBN
Enable/disable Interleaved 25
Enable/disable Matrix 25
Enable/disable GS1-Databar (RSS)
Enable/disable GS1-Databar (RSS-Limited)
Enable/disable GS1-Databar (RSS-Expand)
Enable/disable CODE 93
Enable/disable Industrial 25
Enable/disable MSI
Enable/disable CODE 128
Enable/disable UCC/EAN-128
Enable/disable CODE 11
Enable/disable CODABAR
Enable/disable CODE 39
Enable/disable EAN-8
Enable/disable EAN-13
Enable/disable UPC-E
Enable/disable UPC-A
Enable/disable CODE 39 FULL ASCII
Enable/disable CODE 39 Transmit Start/Stop
Character
Disposal
Electronic devices are recyclable waste and must not be disposed of in the household waste. At
the end of its service life, dispose of the product according to the relevant statutory regulations.
You thus fulfil your statutory obligations and contribute to the protection of the environment.
Technical data
Operating voltage ................................. 5 V/DC
Operating current .................................. max. 250 mA
Charging current ................................... max. 500 mA
USB cable length .................................. approx. 1.5 m
Internal rechargeable battery .................... Built-in Ni-MH batteries (not replaceable) 2 x 1.2 V (AA), 2 x 1150 mAh
Internal memory .................................... 1 MB (can store up to 65,000 datasets for EAN 13 barcodes)
Battery life ............................................. at least 25,000 scans (after full charge)
Charging time ....................................... approx. 4 - 5 hours (full charge)
Wireless range ...................................... 100 m in open spaces
Working frequency ................................ 2.4 GHz
Bluetooth power class ......................... Class 1 (up to 100 mW)
®
Bluetooth profile .................................. HID or SPP (iOS and Android)
®
Bluetooth version ................................ v2.1 (all Android devices communicate over Bluetooth
®
the Xiaomi Redmi)
Cable communication ........................... USB OTG cable (connected devices must support Android OTG)
Scan element type ................................ Red LED (610 nm - 640 nm wavelength)
Depth of field ........................................ UPCA (13 mil): 30 mm - 600 mm
EAN13 (13 mil): 30 mm - 590 mm
Best resolution ...................................... 4 mil
Ambient illumination ............................. 0 - 100,000 lux
Required contrast ................................. ≥30 % (between printed surface and barcode)
Symbologies ......................................... EAN-13, EAN-8, UPC-A, UPC-E, ISSN, ISBN, Codabar, Code
128, Code 93, ITF-6, ITF-14, Interleaved 2 of 5, Industrial 2 of 5,
Matrix 2 of 5, GS1 Databar, Code 39, Code 11, MSI
Scan speed......... .................................. 300 scans/second
Scanning angle ..................................... Pitch ±60° @ 0° Roll and 0° Skew, Roll ±30° @ Pitch and 0°
Skew, Skew ±60° @ Roll and 0° Pitch
Supported operating systems ............... Android 2.x, Android 3.x, Android 4.x, Android 5.x, Android 6.x and
all iOS versions including iOS 9.3
Operating conditions ............................. 0 to +50 °C, 5 – 95 % RH (non-condensing)
Storage conditions ................................ -10 to +60 °C, 5 – 95 % RH (non-condensing)
Dimensions (W x H x D) ....................... 60 x 203 x 95 mm
Weight .................................................. 202 g ± 5 g (barcode scanner)
225 g ± 5 g (charging station)
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in
electronic data processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited.
This publication represent the technical status at the time of printing.
Copyright 2018 by Conrad Electronic SE.
apart from
®
*1462883_V2_0318_02_mxs_m_en