Kaiser KA 3 Series Gebrauchsanweisung Seite 66

2
1
4
6
Simbol
number
3
5
66
Simbol
EN
The opening state
of remote controller
Button 1,
This button not only can adjust clock
time and the timer time but also can
set room humidity.
Adjusting clock time and timer
time:
Press it once, the time increases one
minute. Press it for 1 to 3 seconds,
time display will increase at the speed
of 2 min/sec. For 3 to 5 seconds, it
will increase at the speed of 10 min/sec.
For more than 5 seconds, it will inc-
rease at the speed of 10 min/s.
Button 2, HEALTH
Press this button, the LCD shows
the 3, symbol, the anion emission
function of the air conditioner is started.
Press the button once again, The 3,
symbol disappears, the function is
cancelled at the same time.
Button 4, SLEEP
Press this button, the LCD shows
the 5, symbol, the sleeping function
of the air conditioner is started. After
7 hours of setting this function, the
air conditioner will be off automati-
cally. Press the button once again,
The 5 symbol disappears, the func-
tion is cancelled at the same time.
This function is invalid when the ap-
pliance under the Fan mode.
Button 6, TURBO
When it displays TURBO button:
press this button, the fan speed reach
the highest , press it again it resume
the foregoing fan speed.