Care And Maintenance - Denver Instrument Summit S-114 Betriebsanleitung

Care and Maintenance

Service
On request, Denver Instrument can provide
you with individual service information.
Repairs
Repair work must be performed by trained
service technicians. Any attempt by untrained
persons to perform repairs may result in
considerable hazards for the user.
Cleaning
§ Unplug the AC adapter from the wall outlet
(mains supply). If you have an interface
cable connected to the balance port, unplug
it from the port.
!
Make sure that no liquid enters the
balance/scale housing.
! Do not aggressive cleaning agents (solvents
or similar agents).
§ After cleaning, wipe down the balance with
a soft, dry cloth.
On analytical balances remove and clean the
weighing pan as follows:
§ Reach beneath the drip/breeeze and lift
it carefully, together with the pan support,
to avoid damaging the weighing system.
!
Make sure that no liquid enters the balance
housing.
Cleaning Stainless Steel Surfaces
Clean all stainless steel parts regularly.
Remove the stainless steel weighing pan and
thoroughly clean it separately. Use a damp
cloth or sponge to clean stainless steel parts
on the balance. You can use any household
cleaning agent that is suitable for use on stain-
less steel. Clean stainless steel surfaces only
by wiping them down. Then rinse the equip-
ment thoroughly, making sure to remove all
residues. Afterwards, allow the equipment to
dry. If desired, you can apply oil to the cleaned
surfaces as additional protection.
49