Installation; Safety Instructions - Conrad Electronic 75 15 74 Bedienungsanleitung

O P E R A T I N G I N S T R U C T I O N S
Waterproof colour camera
with IR IP68
Item-No. 75 15 74
Intended Use
This colour camera set with IR-LED is for mounting in, and protecting, secluded or critical areas
(e.g. surveillance of stores, intercommunication systems, entrances and so on).
The camera is suitable for operation in outdoor areas (IP68). The power supply provided is only
intended for use in dry indoor locations.
The power is supplied via the power supply unit (12 V/DC) provided.
The camera is equipped with infrared LEDs in order to enable night vision. Please observe that
the coloured image reproduction changes into black and white monochrome representation by
the activation of the IR-LEDs caused by increasing dusk. The brightness is recognised by the
camera by a photo sensor at the front side.
Please bear in mind that it is prohibited by law to observe strangers with a camera without their
knowledge and consent.
Do not operate the product in any other way than that described above. This could lead to dam-
age to the product, which may give rise to hazards such as short circuit, fire and electric shock.
The product must not be modified or converted. Always observe the safety instructions includ-
ed in these operating instructions. Read the operating instructions carefully and keep them for
later reference.
Included in package
• Camera
• Mounting bracket
• Installation material
• Power transformer
• Operating Instructions
Symbols
The flash icon in a triangle is used to alert you to potential personal injury
hazards such as electric shock.
This symbol, with an exclamation mark in a triangle, indicates particular dan-
gers associated with handling, function or operation.
The „Hand" symbol indicates special tips and operating information.

Safety Instructions

The warranty will be void in the event of damage caused by failure to observe
these safety instructions! We do not assume any liability for any consequen-
tial damage!
We do not assume any liability for material and personal damage caused by
improper use or non-compliance with the safety instructions. The warranty
will be void in such cases.
• The camera and the power unit must not be modified or converted, as not
only the CE certification will become void but also the warranty.
• The camera and the transformer should not be exposed to extreme temper-
atures, direct sunlight, intense vibration or heavy mechanical stress.
• Where the devices are used connected to other devices e.g. a monitor, the
operating instructions and safety notices of the devices connected must be
followed.
• The use of the surveillance camera system does not replace the personal
supervision of children, or people who require special assistance, but only
serves as support to this supervision.
• After rapid changes in temperature, the camera requires some time to sta-
bilise, in order to adjust to the ambient temperature, before it can be used.
• Electronic devices are not toys and should be kept out of the reach of children!
• The power supply unit conforms to protection class II. It may only be
plugged into a standard household 230V~/50Hz mains socket. Never try to
operate the appliance with another voltage.
• Please contact a qualified person if you are unsure about the safety and cor-
rect use of the system components.
• Never leave the packaging material lie around unattended. Plastic film/bags
etc. can be dangerous playthings for children, there is a risk of suffocation.
• If you have reason to assume that safe operation is no longer possible, dis-
connect the device immediately and secure it against inadvertent operation.
• It can be assumed that safe operation is no longer possible if:
- the device is visibly damaged,
- the device does not function any longer and
- the device was stored under unfavourable conditions for a long
period of time or
- it has been subjected to considerable stress during transportation.
www.conrad.com
Version 08/09
°

Installation

• In commercial institutions, the accident prevention regulations of the
Employer's Liability Insurance Association for Electrical Systems and
Operating Materials are to be observed.
• The camera is suitable for operation in outdoor areas (IP68). The power sup-
ply unit is only suitable for use in dry, closed indoor locations.
• Only use the power supply unit included in delivery.
• Ensure that all the electric connections and connection cables between the
devices and any extension cables conform to the regulations and comply
with the operating instructions.
• Live components may be exposed, if the covers are opened or parts removed
(unless this can be done without tools). Contact points may also be live. If the
appliance needs to be opened for calibrating, servicing, repairing or replac-
ing parts or assemblies, it must be disconnected from all sources of current
first. If servicing or internal repairs are necessary, this must be carried out by
a specialist who is familiar with the risks involved and with the relevant reg-
ulations.
• Capacitors in the device may still be charged, even if the device has been
disconnected from all power supplies.
• Never plug in or unplug the power supply unit and the mains cable, respec-
tively, with damp or wet hands.
• Never pull on the power cable; only unplug it at the power outlet.
• When installing / mounting the appliance, make sure that the connection
cable is neither pinched nor damaged by sharp edges.
• Disconnect the power supply from the power socket if the unit is not in use
for a long period of time.
• Unplug the power supply before cleaning the device.
• In the event of a thunderstorm, unplug the power supply unit for safety rea-
sons.
• Never replace damaged mains cables yourself. In such cases, disconnect
the appliance from the mains and take it to a specialist workshop.
• Never pour out fluids above electrical devices. You run the risk of causing
a fire or a fatal electric shock. If liquids enter the device, immediately dis-
connect it from the power supply, remove the batteries and consult an
expert.
• Maintenance, adjustment and repair may only be carried out by a qualified
specialist or a specialised repair shop.
• If you have any questions, which are not answered in this manual, please
contact our technical service or another specialist.
None of the connection cables must be bent nor squeezed. This can result in
malfunctions, short circuits and defects in the device.
Make sure that cables or wires are not damaged when drilling or bolting in
place.
Please note that you should choose the position for your camera in such a
fashion that it is not exposed to direct sunlight (glare effects can be the con-
sequence). In addition, the camera must be protected from dust and vibra-
tions.
The camera is suitable for operation in outdoor areas (IP68). The power -
supply unit is only suitable for use in dry, closed indoor locations.
Make sure that the plug and socket of the connection cable of the power
supply of the camera are not exposed to humidity. Plugs and sockets may
only be used indoors. The cable from the camera must thus (for installation
in outdoor areas or in damp rooms) be placed so it is fed into a dry room.