Chauvin Arnoux F11N Bedienungsanleitung Seite 18

6 Rotary switch
To select ON/OFF and the basic functions.
7 Display
LCD - 4000 counts (height 12.5 mm) - All the symbols and
functions are shown on the display, except
MAX : the max value function is on.
HOLD : the memory function is on.
: low battery indication.
: indicates that the clamp is operating as an ohmmeter.
W
A : indicates that the clamp is operating as an ammeter.
V : indicates that the clamp is operating as a voltmeter.
~
: indicates that the clamp is measuring an AC voltage
or current.
...
: indicates that the clamp is measuring a DC voltage.
: indicates that the clamp is operating in «diode test».
OL : is displayed to indicate a calibre overload.
For the F13N only
RMS : rms measurement.
kHz : frequency.
: continuity sound test. NB : symbol no displayed
on the F11N
8 Input terminals
Two Æ 4 mm safety terminals for measurement of voltage,
resistances, continuity, diodes and frequency (F13N).
Black marked "COM".
Red marked "+".
Standard gap : 19 mm.
9 Three marks indicate the reference position of the
conductor inside the magnetic circuit.
Function specific to the F13N
X Hz : frequency
This function is accessible via the rotary switch.
18
for the F11N.