Playback Mode - Conrad P-576 Pro Bedienungsanleitung

10. Playback Mode


After switching on the slide/film scanner, the main menu is displayed for about 5
seconds. Then the display goes into scanning mode automatically.
To return to the main menu from scanning mode (see chapter 8. c), press the "OK"
button briefly. Then select the house icon "
"OK" again.
In the main menu, select the playback mode with the
arrow buttons (see circle in the image on the right)
and press the button "OK".
Then a slide show with all images present on the SD
memory card (or the internal memory) is started
automatically; the icon " " briefly appears at the top
left.
To stop the slide slow, briefly press "OK"; the "
icon is displayed.
Press "OK" again now to display the playback menu:
1
2
3
4
Select functions as usual with the buttons " Right/Up" and " Left/Down", confirm with "OK".
The respective active menu item is highlighted in colour.
1) Rotate the image to the right by 90°
After selecting this function with the arrow buttons (menu item highlighted in colour), press the
"OK" button. The image is turned clockwise to the right by 90°; this process may take several
seconds.
2) Rotate the image to the left by 90°
This function turns the image counter-clockwise to the left by 90°
3) Vertical image mirroring
This function is used for vertical mirroring of the image (left/right is swapped, e.g. when the
slide/negative was inserted incorrectly).
" with the arrow buttons, and press
"
5
6
7
8
45