Setting Mode - Conrad P-576 Pro Bedienungsanleitung

13. Setting Mode


After switching on the slide/film scanner, the main menu is displayed for about 5
seconds. Then the display goes into scanning mode automatically.
To return to the main menu from scanning mode (see chapter 8. c), press the "OK"
button briefly. Then select the house icon "
"OK" again.
In the main menu, select the setting mode icon with
the arrow buttons (see circle in the image on the right)
and press the button "OK".
The setting menu for TV standard and format function is displayed:
Select functions as usual with the buttons " Right/Up" and " Left/Down", confirm with "OK".
The respective active menu item is highlighted in colour.
1) Select TV standard PAL/NTSC for the video output
After selecting this function with the arrow buttons
(menu item highlighted in colour), press the "OK"
button. The display shows the icon "PAL" and "NTSC";
see image on the right.
Select the TV standard and confirm with "OK" to
return to the main menu, see chapter 8. c).
" with the arrow buttons, and press
1
2
3
49