11. Select Film Type
After switching on the slide/film scanner, the main menu is displayed for about 5
seconds. Then the display goes into scanning mode automatically.
To return to the main menu from scanning mode (see chapter 8. c), press the "OK"
button briefly. Then select the house icon "
"OK" again.
In the main menu, select the film type icon with the
arrow buttons (see circle in the image on the right)
and press the button "OK".
Then the film type selection menu is displayed:
1
2
3
Select the film type with the buttons " Right/Up" and " Left/Down", confirm with "OK". The
respectively active film type is highlighted in colour.
1) Colour negative
2) Slides
3) Black/white negative
Select the film type and confirm with "OK"; scanning mode is activated again at
once, see chapter 9.
" with the arrow buttons, and press
47