Troubleshooting - Hama 00090918 Bedienungsanleitung

d Bedienungsanleitung
Cleaning & Care:
Occasional care and cleaning of the device ensure a
long service life. Use a soft, lint-free cloth (e.g. Hama
item no. 42267/51076/51077/78399 , etc.) to clean the
device. Slightly dampen the cloth if the device is very
dirty. However, never use strong solvents such as
alcohol, petrol or thinners. This could attack the casing
or the protective glass of the display.
Caution – Danger to life!
To prevent the risk of an electric shock, never open
the cover of the digital picture frame, casing or power
adapter components. There are no serviceable parts in
the digital picture frame or power supply.
Warranty/customer service
CAUTION! Any guarantee or warranty claims are
void if the device is opened by unauthorised persons
or service workshops. Please contact the specialist
dealer you purchased the device from if you fi nd a fault
with your digital picture frame. Your dealer can quickly
deal with your customer service requirement without
problem. Service and repairs on your digital picture
frame must only be performed by authorised specialist
workshops.

TROUBLESHOOTING:

The picture frame can not be switched on:
Cause: Problem with the electrical supply of the picture
screen.
Check that the plug of the power adapter is connected
correctly and completely. Also check that the power
supply unit is connected to the power supply and
supplied with electricity.
The picture frame can no longer be operated when
selecting fi les:
Cause: Safety violation in the internal software of the
digital picture frame.
This may be due to the fi le format used. There are some
confi gurations that cause the software of the digital
picture frame to crash. However, the cause does not
lie with the technology/software of the digital picture
screen, but with the fi le convention of the fi le to be
displayed or played.
10
Films/images (according to the device specifi cation)
appear out of focus or grainy on the display
Cause: the data rate/quality or resolution is too low
The quality loss of images is caused by compression
and insuffi cient resolution. If it is possible to have a
higher resolution for the data, use this when displaying
or playing fi les.
Files are not displayed:
Cause: Resolution too high
Please note that loading requires a lot more time for
large fi le sizes. Reduce the image size (dimensions in
pixels) if required.
Data on a memory card can not be accessed.
Cause: incompatible memory card or incorrect data
media format
There are some types of memory cards/media that are
not compatible with the digital picture frame. In this
case, the card is not recognised and can not be used to
display or play fi les.
Specifi cations:
Display: 3.5" TFT-LC display;
Resolution: 320 x 240 pixels up to 480 x 272 pixels
Supported memory cards: SD/MMC (32MB - 2GB)
Image format: JPEG
Power supply: AC/DC adapter (5V, 500 - 1000mA)
Dimensions: approx. 17,0 x 7,0 x 13,2 cm (W x D x H)
Humidity: 20 - 90% RH (Non-condesing)
WARNING:
So-called pixel errors can occur depending on the
manufacturing process. These manifest themselves as
white or black pixels that permanently light up during
display. Within the context of production tolerances, a
max. 0.01% of these pixel errors measured on the total
size of the screen are permitted as a tolerance and do
not represent a product fault.