Hama 00090918 Bedienungsanleitung Seite 13

2. Switching the screen on/off:
Press the "ON/OFF" button for 5 seconds to switch off
the LCD. Hold the "ON/OFF" button for 5 seconds to
switch the LCD on again.
3. Setting the image display duration or displaying a
fi xed image (manual setting)
In "Slideshow" mode, you can vary the image display
duration between 5, 10 and 30 seconds or switch to
manual mode by pressing the "MODE" button. The
selected setting is displayed in the top right-hand
corner of the LCD (see images below).
4. Previous photo
Press the "< / Contrast –" button in manual mode to
display the previous photo again.
5. Next photo
Press the "< / Contrast +" button in manual mode to
display the next photo.
6. Image rotation
You can rotate the selected photo by 90°, 180°, 270° and
back to its starting position by pressing the "Rotate"
button.
12
7. Setting the LCD contrast:
Press and hold the "< / Contrast – " or "> / Contrast +"
button to set the LCD contrast from 1-28.
Setting the time and date display:
Press and hold the "DATE/TIME" button for approx. 2
seconds. When "12/24hr" fl ashes, press the "SET/DAY"
button to adjust the setting to 12 or 24 hour display. Then
press the "DATE/TIME" button to confi rm the display
you have selected.
The next settings option now fl ashes, press the
"SET/DAY" button to make the desired setting and then
press the "DATE/TIME" button again to confi rm. Repeat
this process to set the hours, minutes, month and date.
(Warning: If you hold the "SET/DAY" button, the device
switches through settings quickly).
If you do not touch any button in the above setting mode
within 30 seconds, the display automatically returns to
the standard setting.
Setting the alarm function:
Press the "ALARM" button to set the desired alarm
time. The alarm is set to "PM12:00" by default. The
alarm is switched off.
You can switch the alarm function on or off by pressing
the "SET /DAY" button. If the alarm is activated, the
alarm symbol is displayed.