Troubleshooting - Hama Digital Ball Bedienungsanleitung

Trouble Shooting
Symptom
No Photo
No Power
Does not function properly
Can not load photos
8
Cause
No photo inside
Unplug the USB cable while
downloading
The on/off switch switchs to off
No battery or the batteries are not
well connected
No battery or the batteries are not
well connected
The system does not works well
Incompatible file format
The memory is full
Incompatible OS
Corrective actions
Make sure you have download photos inside
Attempting to disconnect the Digital Photo Ball
without using the "Safely Remove Device"
procedure may cause the files in the memory
to be unreadable.
Disconnecting the Digital Photo Ball from a
computer:
1. Click the "Safely Remove Device" icon
on the Task Bar located on the bottom right
corner of the computer desktop
2. A dialogue box ("Safely Remove Hardware")
will appear.
3. Select USB Mass Storage Device and click
"Stop".
4. On the next dialogue box, click "OK".
5. On the final dialogue box, click "Close". Now
you can safely remove the Digital Photo Ball.
Make sure the on/off switchs to „on" position.
1.Make sure there are 2 x AAA batteries in the
battery house and well connected
2.Replace the used up batteries.
1.Make sure there are 2 x AAA batteries in the
battery house and well connected
2.Replace the used up batteries.
Restart the system by slide the switch to
„off",and then slide it to „on".
Compatible photo format:JPG
This Digital Photo Station is built-in 8M me-
mory which can store up to 70 photos, since
the resolution difference of source photo, the
stock number may more or less than 70
Compatible OS:Windows® 2000 ,
XP™,Vista™,7