Sound Settings And Setup Menu; Changing The Sound Settings; Adjusting The Sound Characteristics; Enjoying Sophisticated Sound Functions - Sony DSX-A30 Bedienungsanleitung

Sound Settings and
Setup Menu
Changing the sound
settings
Adjusting the sound
characteristics
1
During reception/playback, press the
select button.
2
Rotate the control dial until the desired
menu item appears, then press it.
3
Rotate the control dial to select the
setting, then press it.
4
Press (BACK).
The following items can be set:
EQ3 PRST (EQ3 PRESET) (page 15)
EQ3 LOW* (page 16)
1
EQ3 MID* (page 16)
1
(page 16)
EQ3 HIGH*
1
BALANCE
Adjusts the sound balance: "RIGHT-15
(R15)" – "CENTER (0)" – "LEFT-15
(L15)."
FADER
Adjusts the relative level: "FRONT-15
(F15)" – "CENTER (0)" – "REAR-15
(R15)."
AUX VOL* (AUX Volume level)
2
Adjusts the volume level for each
connected auxiliary equipment: "+18
dB" – "0 dB" – "–8 dB."
This setting negates the need to adjust
the volume level between sources.
*1 When EQ3 is activated (page 16).
*2 When AUX source is activated (page 18).
Enjoying sophisticated
sound functions
Selecting the sound quality
— EQ3 Preset
You can select an equalizer curve from 7
equalizer curves (XPLOD, VOCAL, EDGE,
CRUISE, SPACE, GRAVITY, CUSTOM or
OFF).
1
During reception/playback, press the
select button.
2
Rotate the control dial until "EQ3
PRST" appears, then press it.
3
Rotate the control dial until the desired
equalizer curve appears, then press it.
4
Press (BACK).
15