Sygonix 43904X Bedienungsanleitung Seite 31

Proceed as follows to add several users in sequence:
* Manager password # 1 Desired user ID # Apply fi ngerprint to transparent glass area 2x
Further user
Desired user ID # Apply fi ngerprint to transparent glass area 2x
Further user
Desired user ID # Apply fi ngerprint to transparent glass area 2x
Further user
Desired user ID # Apply fi ngerprint to transparent glass area 2x
...
Complete programming with the #* buttons.
If a fi ngerprint is to be added, the fi nger to be added must be placed on the transparent
glass area 2x. During programming of the fi ngerprint, the LED is lit orange and the back-
lighting fl ashes blue quickly.
When a fi ngerprint was successfully programmed, this is confi rmed by the system by the
LED changing from orange to green after the fi nger was applied twice. A brief signal also
sounds.
Proceed as follows to delete a user:
* Manger Password # 2 User ID # *
Proceed as follows to delete several users:
* Manger Password # 2 User ID # User ID # User ID # .... User ID # # *
Adding/deleting user by manager fi ngerprint
Two manager fi ngerprints can be programmed into the fi ngerprint system. The two manager fi n-
gerprints have ID1 and ID2.
ID1 can be used to add users. ID2 can be used to delete users.
Proceed as follows to programme a manager fi ngerprint:
* Manager password # 1 1 # Apply fi ngerprint for ID1 to transparent glass area 2x 2 # Apply fi nger-
print for ID2 to transparent glass area 2x # *
Proceed as follows to programme a user with the manager fi ngerprint:
Apply manager fi ngerprint ID1 to transparent glass area,
Apply fi ngerprint to be programmed to transparent glass area 2x,
Apply manager fi ngerprint ID1 to transparent glass area.
31