F) Deleting Rain Data; G) Switching From Display For Indoor/Outdoor Temperature; H) Displaying Max/Min Values For Indoor/Outdoor Temperature - Conrad KW-9015 Bedienungsanleitung

f) Deleting rain data

You can delete the entire rain data by pressing the two buttons " SINCE" (B) and " HISTORY"
(C) simultaneously for about 3 seconds until a tone signal can be heard.
Now all rain data is deleted.

g) Switching from display for indoor/outdoor temperature

In the top part of the display the indoor and/or outdoor temperature is shown. To switch it, briefly
press the "SEARCH IN/OUT TEMP" (D) button.
"IN TEMP" on display:
"OUT TEMP" on display:

If lines, e.g. ("—.-") are shown for the outdoor temperature, please check the
state of the battery of the exterior unit and the radio reception.

h) Displaying MAX/MIN values for indoor/outdoor temperature

By pressing the "MAX/MIN" (G) button on the back of the base station briefly several times, you
can toggle between:
• MAX value of indoor temperature
• MIN value of indoor temperature
• MAX value of outdoor temperature
• MIN value of outdoor temperature
• Current indoor/outdoor temperature, depending on what was activated before the MAX/
MIN values
50
display of current indoor temperature
display of current outdoor temperature