ZyXEL NBG334W Schnellstartanleitung Seite 4

If an LED does not turn on, check your connections. If this doesn't help,
disconnect the NBG334W from its power source, wait for a few seconds
and turn it back on.
2 Accessing the Web Configurator
Default Login Information
IP address
administrator password
1 Launch an Internet browser such as Internet Explorer. Enter "http://192.168.1.1" as
shown below.
2 The Password window displays. Enter the password ("1234" is the default) and click
Login.
If the login screen does not display, make sure your computer is set to receive
3
an IP address dynamically. If that doesn't help, check your web browser's
security settings (see the appendix in the User's Guide for information on both
suggestions).
4 Change the password in the screen that follows and click Apply.
ENGLISH
http://192.168.1.1
1234
4