Cooker Hood; Savecair Control; General; Startup Wizard - SystemAir SAVE VTR 150/K Bedienungsanleitung

GB
5

Cooker hood

Danger
• Do NOT flambé beneath the cooker hood when in use.
• Sufficient air flow must be secured to the room when the cooker hood is in use
Press button A to turn on the lights.
Press button B once to open the ventilation damper when cooking. The LED indicator (C) is steadily lit.
Press button B again to force the ventilation. The LED indicator is blinking.
Press button B a third time to close the ventilation damper. The ventilation fan goes back to nominal speed and the LED
indicator goes off.
The damper will automatically close after 60 minutes unless it is manually closed.
No extract air will go through the cooker hood in "off" mode. Extract air from the kitchen needs a separate air valve.
A
Fig. 3 Cooker hood front panel
Hint: Let the damper be open a while before and after cooking to prevent smoke from spreading in the room.
6

SAVECair control

6.1

General

SAVECair is a modern touchscreen LCD control panel, simply known as HMI — Human Machine Interface. The
touchscreen display provides information about current state of the unit and allows you to control all system functions.
Settings are done by touching the icons or options. The touch screen is sensitive and it is not necessary to press too
hard.
6.2

Startup wizard

During the first power up of the unit, you will be asked to set:
• menu language
• time and date
• airflow control type (Manual/RPM) and airflow level values
• heater type (None/Electrical/Water/Change-over)
If the start-up wizard is cancelled it will start again during next power up of the unit, this will continue until start-up wiz-
ard is successfully finished.
6.3

Common symbols

The following selection symbols are common and are present in most menu pages:
211471 | B001
B C
7
Cooker hood |