Herunterladen Inhalt Inhalt Diese Seite drucken

Maintenance / Cleaning; Spare Parts/Accessories - 3M Peltor WS SportTac Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für Peltor WS SportTac:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 35
EN
8. MAINTENANCE/CLEANING
This product is covered by the WEEE directive 2002/96/EC and is
recyclable. Dispose the product in accordance with national regulation.
Use local recycling system for electronic products.
8:1 CLEANING
Clean/disinfect the shells, headband and ear cushions regularly with soap and
warm water. Note: Do not immerse in water!
8:2 REMOVING/REPLACING OUTER SHELLS
See 3:1
8:3 REMOVING/REPLACING EAR CUSHIONS
(C:7) Slide your fingers under the edge of the ear cushion and pull straight out.
(C:8) Insert a new ear cushion by pressing until it snaps into place.

9. SPARE PARTS/ACCESSORIES

HY68 SV Hygiene kit
Easy to replace hygiene kit consisting of two attenuation cushions and snap-in
ear cushions. Replace at least twice a year to ensure constant attenuation,
hygiene and comfort, or if any of the parts of the hygiene kit are defective. The
headset and particularly the ear cushions can deteriorate over time and should
be inspected regularly to ensure that there are no cracks and sound leakage.
If an ear cushion is damaged, it must be replaced. See Maintenance/Cleaning
section.
Cords for audio inputs (receiving only)
FL6H
J22 to 3.5 mm mono contact
FL6M
J22 to 2.5 mm mono contact
FL6N
J22 to 3.5 mm stereo contact
FL6CE
3.5 mm to 3.5 mm stereo
Audio cord for two-way communication (Type ICOM)
TAMT06 Cord with push-to-talk button (PTT) and microphone, J22 contact
Other spare parts/accessories
MT53/1** Boom microphone (I:1) for communication in extremely noisy
environments
HY400 Headband padding. For an optimal fit on a smaller head, use HY400
headband padding. The padding is easy to attach to the standard padding.
See the installation instructions (J).
The Bluetooth
word mark and logos are registered trademarks owned by
®
Bluetooth SIG, Inc. and any use of such marks by 3M is under license. Other
trademarks and trade names are those of their respective owners.
'3M does not accept liability of any kind, be it direct or consequential (includ-
ing, but not limited to, loss of profits, business and/or goodwill) arising from
reliance upon any information herein provided by 3M. The user is responsible
for determining the suitability of the products for their intended use. Nothing in
this statement will be deemed to exclude or restrict 3M's liability for death or
personal injury arising from its negligence.'
8

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Peltor ws5Peltor ws workstyle

Inhaltsverzeichnis