Message.display.(Windows.only) - Buffalo HD-WLU3R1 Benutzerhandbuch

Message Display (Windows Only)
The RAID Utility can display messages as shown below.
The message display function is set as shown below.
Note: The screens may vary depending on the OS you are using.
1
Right-click the
2
Click the [Monitoring config] tab.
3
Messages are displayed when any of the following events occur.
・ Device connection or disconnection
・ Hard drive error
・ Overheating of hard drive
・ Rebuilding is in progress
・ RAID maintenance was started
・ Error during RAID maintenance
Message display settings are now configured.
24
HD-WLU3 User Manual
icon in the taskbar, and select [Option].
① Specify the monitoring interval for the
② Check the events that will trigger a
③ Click [Config].
・ Change in RAID array
・ Fan malfunction
・ Hard drive replacement count was increased
・ Rebuilding is completed
・ RAID maintenance was completed
・ Available hard drive space is low (less than 10%)
device.
message.
Go to Next Page