Buffalo HD-WLU3R1 Benutzerhandbuch Seite 19

3
Select the RAID array to be built, then click [Next].
4
Select the format system (Windows 7/Vista/XP only).
Notes: ・ If using Windows Server 2003 or Macintosh, the screen above is not displayed.
・ For best results, use NTFS format. FAT32 format doesn't support files larger than
・ Windows XP doesn't support drives larger than 2 TB.
When formatting the DriveStation with a capacity larger than 2 TB, select "NTFS
・ When formatting a capacity larger than 2 TB in Windows Vista, selecting "NTFS
5
When the message "If the disk configuration is changed, all data on the drive
will be erased. Are you sure you want to proceed?" is displayed, click [Yes].
18
HD-WLU3 User Manual
Skip to the next step.
4 GB.
Compatible" or "FAT32-Compatible". This divides the drive area into partitions
not exceeding 2 TB for formatting.
(GPT)(Recommended)" enables the creation of drive areas larger than 2 TB.
However, in this case, the drive area cannot be used in Windows XP.
① Select the RAID array to be built.
② Click [Next].
① Select the format system.
② Click [Next].
Go to Next Page