Buffalo HD-WLU3R1 Benutzerhandbuch Seite 22

2
Click [Config], and then click [Set Password].
If a RAID Password is Configured
If a RAID password is already set, enter it and click [OK].
Note: If you have forgotten the RAID password, then the RAID array cannot be changed.
3
4
When "The password was set" is displayed, click [OK].
Setting of the password is now complete.
Click [Config], then select [Set Password].
① Enter the password.
② Click [OK].
① E n t e r t h e p a s s wo r d t h a t w i l l b e
set twice (20 or less alphanumeric
characters).
If Hint is set, the preset hint is displayed
w h e n p r o m p t e d f o r t h e p a s s w o r d .
Because anyone can view the hint, it is
recommended that you set a password
that cannot be guessed by anyone else.
The hint can be set up to a maximum of 64
characters.
② Click [OK].
HD-WLU3 User Manual
21