Abus TVIP52500 Bedienungsanleitung Seite 89

"Window Name": Here you can enter the window name displayed at the top of the widow.
"Sensitivity": Here you can adjust the sensitivity of the motion detection. The higher the sensitivity the faster
the motion detection will react at motion.
"Percentage": Here can set the
percentage of the image that needs to
change in order to trigger motion
detection. This setting is to reduce false
alarms.
„New": Click here to add a new window.
In order to change the size or move the
window press and hold the left mouse
button on the window or frame and
make the changes. By pressing the „X"
in the top right corner you delete the
window.
„Save": Click here to apply the
changes.
Motion indicator:
Green: Movement is recognized, but below detection settings.
Red: Movement is recognized and motion detection is triggered. The corresponding window will also show a
red frame.
Usage of motion profiles:
The network camera supports different motion profiles:
•
Day:
•
Night:
•
Schedule:
30% Percent
Use this profile if the network camera is installed at a location with permanent
daylight conditions.
Use this profile if the network camera is installed at a location with permanent low
light conditions.
Here you can select a schedule. The settings will only be active within this
timeframe.
89
English