Abus TVIP52500 Bedienungsanleitung Seite 292

autospeed 1 ~ 5
Group: eptz_c<0~(n-1)>_s<0~(m-1)> for n channel product. and m is the number of streams which
support ePTZ.
PARAMETER
patrolseq
patroldwelling
i<0~19>_name
i<0~19>_pos
i<0~19>_size
Drive the digital output
Note: This request requires the privilege of viewer.
Method: GET/POST
Syntax:
http://<servername>/cgi-bin/dido/setdo.cgi?do1=<state>[&do2=<state>]
[&do3=<state>][&do4=<state>][&return=<return page>]
Where state is 0, 1. "0" means inactive or normal state while "1" means active or triggered state.
PARAMETER VALUE
0, 1
do<num>
return <return page>
1/7 Auto pan/patrol speed
(It should be set by eCamCtrl.cgi rather than by
setparam.cgi.)
VALUE SECURITY
(get/set)
string[120] 1/4
string[160] 1/4
string[40] 1/7
<coordinate> 1/7
<window size> 1/7
DESCRIPTION
0 – inactive, normal state
1 – active, triggered state
Redirect to the page <return page> after the parameter is
assigned. The <return page> can be a full URL path or relative
DESCRIPTION
The indexes of patrol points, separated by ","
The dwelling time of each patrol point, separated
by ","
Name of ePTZ preset.
(It should be set by eCamCtrl.cgi rather than by
setparam.cgi.)
Left-top corner coordinate of the preset.
(It should be set by eCamCtrl.cgi rather than by
setparam.cgi.)
Width and height of the preset.
(It should be set by eCamCtrl.cgi rather than by
setparam.cgi.)
292