Connection Options - Waeco PerfectView M511L Montage- Und Bedienungsanleitung

PerfectView M511L
No. in 0,
Designation
page 6
1
2 –
3 +
4 IR
5 V1/V2
5.3

Connection options

The following connection options can be found on the monitor:
No. in a,
Designation
page 7
1
2
3
To switch between video source 1 and video source 2 (AV1 and AV2), press
the "V1/V2" button on the remote control (b 10, page 7) or the monitor (0 5,
page 6).
Description
/M
Reduces the value of the selected parameter.
Increases the value of the selected parameter.
Sensor for signals from the remote control.
Switches from video source 1 to video source 2
and vice-versa.
Description
Video connection to a DVD player,
video recorder, camera recorder,
etc. with S-Video output
Headphones connection
12 V DC connection
+
Connection to the 12 V DC voltage source,
e.g. cigarette lighter
Switching on: press briefly
Switching off: hold down for longer than
2 seconds
Opening the menu (when switched on):
press briefly, press several times to switch
between menu items
Technical description
25