Installation - MC Crypt GST-102 Star Bedienungsanleitung

Operating Instructions Operating Instructions
GST-102 Star Laser
Item-No. 59 13 78
Intended Use
The Star Laser is intended for generating laser lighting effects and is operated with the inbuilt
controller.
This product may only be supplied with power by the enclosed power supply unit.
The safety regulations and standards for laser operation must be complied with at all times.
The product may only be used indoors; never outdoors. Contact with moisture, for example in
bathrooms, must be avoided.
Any other use than that described above is not permitted and involves additional risks, such as
injuries to the eyes, short circuits and fi re.
The whole product cannot be altered or rebuilt and the casing should not be opened..
Always observe the safety instructions.
Safety Instructions
The warranty will be void in the event of damage caused by failure to observe
these safety instructions! We do not assume liability for any resulting dam-
age.
We do not assume any liability for material and personal damage caused by
improper use or non-compliance with the safety instructions. The warranty
will be void in such cases.
The exclamation mark indicates important information in these operating in-
structions. Prior to starting up the product, read the operating instructions
entirely; they contain important information on the correct operation.
• This product may only be assembled, commissioned and operated by suitably qualifi ed pro-
fessionals and only in compliance with the requirements stated in this operating manual.
• For safety reasons, any unauthorised conversion and/or modifi cation to the product is not
permitted.
• As power supply, only use the supplied mains adapter.
• Only connect the power adaptor to a normal mains socket connected to the public supply.
Before plugging in the power adaptor, check whether the voltage stated on the power adaptor
complies with the voltage of your electricity supplier.
• Never connect or disconnect power adaptors if your hands are wet.
• Never unplug the power unit from the mains socket by pulling on the cable; always use the
grips on the plug.
• For safety reasons, disconnect the power unit from the mains socket during storms.
• Adjustments or maintenance should only be carried out by trained professionals who are
aware of the dangers. Improperly executed adjustments might result in dangerous laser radia-
tion.
• When operating the laser equipment, always make sure that the laser beam is directed so that
no one is in the projection area and that unintentional refl ected beams (e.g. from refl ective
objects) cannot be directed into areas where people are present.
• Laser radiation can be dangerous, if the laser beam or its refl ection enters unprotected eyes.
Therefore, before using the laser equipment, familiarise yourself with the statutory regulations
and instructions for operating such a laser device.
• Never look into the laser beam and never point it at people or animals. Do not use optical
instruments for this either. Laser radiation may result in injuries to the eyes or skin.
• Do not point the laser beam at mirrors or other refl ective surfaces. The uncontrolled, refl ected
beam may strike people or animals.
• Never leave the laser in operation unattended.
• If possible, restrict the range of radiation by using screens or partitions.
• Wherever possible, direct the laser in such a way that it does not cross eye level.
• Caution: if operation settings or procedures others than those described here in these
instructions are used, it could result in exposure to dangerous radiation.
• The product is equipped with a class 2 laser. Laser signs in different languages are included in
the package. If the sign on the laser is not written in the language of your country, please affi x
the appropriate sign onto the laser.
Version 08/11
• Never look directly into the laser beam when the device is in operation. The intense light
rays could temporarily impair your eyesight. Moreover, they may trigger epileptic seizures for
°
vulnerable persons. This applies in particular to epileptics.
• The device is not a toy. Children and adolescents cannot judge the dangers of electrical de-
vices and lasers.
• Inspect the laser unit from time to time for damage. Should the laser unit or the power supply
unit show any damage, disconnect them from the power supply (unplug the power supply
unit). Do not use the product afterwards, instead take it to a specialist workshop.
• Never pour liquids over electrical appliances and never leave objects fi lled with liquids (e.g.
vases) in the vicinity of the device. You run the risk of causing a fi re or a fatal electric shock.
If liquids enter the device, immediately disconnect it from the power supply, unplug the power
supply unit from the mains and consult an expert.
• Do not expose the device to high temperatures, dripping or sprayed water, strong vibrations or
heavy mechanical stress.
• Do not place open fl ames, such as burning candles, on or close to the device.
• Do not leave packing materials unattended. It may become a dangerous plaything for children.
• Do not leave the device in operation when it is unattended. For safety reasons, unplug from
the mains socket after each operation.
• Do not use the device in a tropical climate.
• If in doubt about how to connect the device correctly, or should any questions arise that are
not answered in these operating instructions, please contact our technical advisory service or
another specialist.
• Also observe further safety instructions in the individual sections of this operating guide.
Description of the Features
• Generation of a laser starry sky with different effects
• Large emission range
• Green and red laser effect
• Solid aluminium housing
• Mounting bracket
• Inbuilt fan for effective cooling and long service life

Installation

The assembly and the installation of the device must be carried out by a spe-
cialist who is familiar with the hazards and the relevant regulations. Repairs,
operation and maintenance of the product may only be carried out by quali-
fi ed personnel.
When selecting the location for installing your device, take care that it will
not be subjected to shaking, vibrations, dust, heat, cold or moisture. Further-
more, keep the product away from strong transformers or motors.
The device must be mounted out of normal reach.
When installing the product ensure that the power supply unit's power cord
is not jammed or damaged by sharp edges.
During installation and service work, the area below the installation location
must be cordoned off.
The installation surface, or mounting fi xture, must be designed so that it can
withstand 10 times the loading capacity for at least 1 hour without permanent
damaging deformation.
It is also essential that the device is secured by means of a second safety
restraint, which is independent of the proper mounting supports, when it is
installed in an elevated position. If the main supports fail, no part of the in-
stallation should be able to fall down.
Observe all the relevant regulations when installing the device.
Keep a free area of 15 cm around the housing to ensure unhindered heat dis-
sipation. Otherwise, the laser may overheat.
CAUTION LASER RADIATION
DO NOT STARE INTO THE BEAM
CLASS 2 LASER PRODUCT
Output: <1mW
Wavelength: 532/650nm
EN 60 825-1:2007