Mains Connection; Operation; General Operation - Renkforce 2521586 Bedienungsanleitung

11. Mains connection

The mains socket to which the amplifier is connected must be in close vicinity to the device and easily ac-
cessible so that the device can be easily disconnected from the mains in the event of a fault.
Make sure that the voltage indicated on the amplifier corresponds with your household mains voltage.
Never attempt to operate the device with any other type of voltage.
Do not let the power cord come into contact with other cables.
Exercise caution when handling power cords and mains connections. Mains voltages can cause fatal
electric shocks.
Do not leave cables lying around; ask an electrician to lay them properly to prevent the risk of an accident.
1. Plug the power cord into the power connector (15) on the device.
2. Insert the mains plug into a grounded mains socket.

12. Operation

a) General operation
• Pressing the
button (1) turns the device on and off.
• To increase the volume, turn the rotary knob (4) clockwise or press the + button (18) on the remote control.
• To decrease the volume, turn the rotary knob (4) counter-clockwise or press the - button (17) on the remote control.
• To select the audio source, press the rotary knob (4) or the MODE button (16) on the remote control. The audio input
indicator (3) shows the selected audio source.
• Press the button
When using the remote control, point the front of the remote control at the IR receiver (6) on the device.
28
(8) to pause or resume playback.