Intended Use; Explanation Of Symbols - Renkforce E-SA 9 Bedienungsanleitung

Intended
Use
The amplifier is intended for use in private music systems.
The device serves to amplify low-level audio signals. This is achieved by connecting the appliance between the signal
source to be amplified and the loudspeakers.
This product is only approved for the connection to 230V~/50Hz alternating voltage. It can only be used in closed
rooms, and therefore not outdoors. Contact with moisture, such as in bathrooms, must be avoided.
The conditions described above could damage the product and could cause short-circuits, fire, and electric shock,
etc. No part of the product should be altered or modified and the housing should not be opened!
The safety instructions must be observed at all times.

Explanation of Symbols


22
Downloaded from www.Manualslib.com
Take note of all the safety instructions in these operating instructions!
The lightening symbol in a triangle warns you against unprotected live components or elements inside
the housing or „live" connection points. Coming into contact with these components or connection
points may be fatal.
Cables connected to such connection points may only be connected by an expert or you have to use
ready to connect cables.
The device contains no parts that should be serviced by the user. Therefore, do not open the device.
The exclamation mark symbol on the device indicates that the user should read these operating
instructions prior to using the product.
The "Hand" symbol indicates special tips and operating information.
manuals search engine
Operating Instructions

English