Intended Use; Explanation Of Symbols; Scope Of Delivery - Renkforce A-1000 Bedienungsanleitung

2. Intended Use

The Renkforce amplifier A-1000 is used to amplify low-level audio signals in home audio systems; it is swit-
ched between the signal source to be amplified and the speakers.
The amplifier must only be controlled by a low-level audio source.
This product is only approved for connection to 230 V/50 Hz alternating voltage.
It is intended for indoor use only. Do not use it outdoors. Contact with moisture, e.g. in bathrooms, must be
avoided under all circumstances.
Any use other than that described above will damage this product and involves the risk of short circuit,
fire, electric shock, etc.
The entire product must not be modified or converted, and the casing must not be opened.
Observe all safety information in these operating instructions!
3. Symbols
The lightning symbol in a triangle warns against unprotected live components or elements inside
the housing or „live" connection points. Touching these components or connection points may
pose a danger to life.
Lines must only be connected to such connection points by specialists, or lines ready for con-
nection must be used.
The device contains no parts that require servicing by the user. Therefore, never open the de-
vice.
The exclamation mark symbol indicates that the user must read these operating instructions
before commissioning of the device, and observe them during operation.
The arrow symbol indicates special advice and operating information.

4. Scope of Delivery

• Amplifier
• Remote Control
• Batteries
• Operating Instructions
24