Macro Function; Programming Macros - Renkforce 34 28 16 Bedienungsanleitung

Macro Function

The macro feature allows a command sequence of as many as 60 commands to be
stored any one desired key.
This is especially useful, if you want to control multiple devices. Using this function, it
is possible to switch on or off all the devices of your audio/video system at the same
time with one single key.
Time delays can be inserted between the individual commands.
You can programme several macros.

Programming macros

• Press the MACRO key for approx. 4
seconds.
• The keys 2, 4, 6 and 8 will appear. Press
each of these keys until they are hidden.
This procedure prevents inadvertent
programme changes.
• The MACRO key starts to flash.
• Press a device selection key (5) and then the operating key (4) on which you wish
to store the macro.
• Now press the operating keys (4) with the commands to be saved in the macro.
Stick to the sequence in which the commands are to be performed. You can also
save commands of various devices in a macro, by switching the device by
pressing a device selection key (5) when entering the command sequence.
• To insert a time delay between the
individual commands, press the DELAY
key and then the desired intercal time in
seconds using the numerical keys (e.g.
"2" for two seconds).
54
Operating Instructions

English