Renkforce 34 28 16 Bedienungsanleitung Seite 44

• Press the key with the dot.
• Switch the device on whose IR codes you
want to program (e.g. the TV device).
• Press the appropriate device selection
key (5)
• Enter the 4-digit code for your device from
the code list and check the function by
pressin the On/Off key (top right). Your
devices switches itself off if the code is
correct.
• Several codes are stated for some codes. In this case, try out the various codes
until the universal remote control controls your device without fault.
• If, in entering the code, the display ERROR appears, that means that the code
entered does not exist and that it must be an incorrect entry.
• After correct entry of the code, the device changes back to normal operation again
and you can test the programming. If all keys do not function correctly, try another
code of the manufacturer from the code list.
44
Operating Instructions

English