Oase Aquarius Universal 440i Gebrauchsanleitung Seite 11

This is how to connect the power supply:
Switching on: Connect power plug to the socket. The unit switches on immedia-
tely when the power connection is established.
Switching off: Disconnect the power plug.
Maintenance and cleaning
Attention! Dangerous electrical voltage.
Possible consequences: Death or severe injury.
Protective measures:
− Prior to reaching into the water, disconnect the power supply to all units
used in the water.
− Disconnect the power plug prior to carrying out work on the unit.
Attention! The installed temperature monitor automatically turns the
pump off, if it is overloaded. The pump automatically switches on again
once the motor has cooled down. Risk of accident!
Cleaning the unit
If necessary, clean the unit with clear water using a soft brush.
− Never use aggressive cleaning agents or chemical solutions. These could
attack the housing surface or impair the function.
− In the event of stubborn furring (calcium deposits), a common household
cleaner free from vinegar and chlorine can be used. Subsequently, clean the
pump thoroughly using clear water.
Disposal
Do not dispose of this unit with domestic waste! For disposal purposes,
please use the return system provided. Disable the unit beforehand by
cutting off the cables.
Storage/Over-wintering
Remove the unit at temperatures below zero degrees centigrade. Thoroughly
clean and check the unit for damage.
Store the unit immersed in water or filled with water in a frost-free place.
Do not flood the power plug!
Repair
A damaged housing cannot be repaired and must be put out of operation. Dispose
of the unit in accordance with the regulations.
- GB -
11