ECG SP 466 Bedienungsanleitung Seite 19

DESCRIPTION
OPERATING INSTRUCTIONS
The chopper is intended for chopping fruit, vegetables, meat, nuts, herbs, etc.
Before fi rst use, rinse the attachment and the container well.
1. Hold the blade unit by the top plastic part and attach it carefully on the central protrusion of the bowl. Be
very careful when handling it, the blades of the blade unit are very sharp.
2. Place the food in the mixing bowl according to the processing guide. The volume of the food should not
exceed 2/3 of the container volume. Put the lid on the bowl.
3. Put the base with the motor in correct position in the lid of the bowl and onto the blade unit shaft.
4. Plug the power cord in the electrical outlet.
5. Press the switch on the top of the base briefl y and repeatedly to process the foods to desired consistency.
6. After the blade unit completely stops, unplug the power cord from the outlet and only then remove the
base with the motor and the lid of the container.
7. Carefully remove the blade unit from the bowl and lastly, remove the processed foods.
Safety protection: The motor is equipped with a safety circuit, which shuts the appliance off
automatically in case of overload and after cooling enables using it again.
Food processing guide
INGREDIENT
Onion
Fruit compote
Garlic
Biscuits
Cheese
Almonds
Hazelnuts
Walnuts
Hard-boiled eggs
Meat
Ham
Liquids
1
2
1. Power switch
2. Base with motor
3. Chopper container lid
4. Chopping blade
3
5. Chopper container
4
5
MAX. AMOUNT (g)
200 g (cut into eighths)
150 g (about 5 g / piece)
150 g
20 g
80 g
80 g
80 g
80 g
4 egg yolks
150 g (about 5 g / piece)
150 g
0.3 l
MAX. TIME (s)
5–10 seconds in pulses
10 seconds
5–10 seconds in pulses
15 seconds
15 seconds
15 seconds
15 seconds
15 seconds
5–10 seconds in pulses
10 seconds
10 seconds
10 seconds
GB
19