Layout; Items Supplied; Intended Use; Technical Data - EINHELL BG-WW 1136 Originalbetriebsanleitung

Anleitung_BG_WW_1136_SPK7:_
GB
2. Layout (see Fig. 1)
1. Pressure vessel
2. Supporting foot
3. Pressure gauge
4. Carry handle
5. Connecting the discharge line
6. Coarse filter screw
7. Intake line connection
8. Water drain screw
13. Wrench for coarse filter screw

3. Items supplied

Accessories are not included (Fig. 4/Item 1/2/3)
and (Fig. 5/Item 1).
Open the packaging and take out the equipment
with care.
Remove the packaging material and any
packaging and/or transportation braces (if
available).
Check to see if all items are supplied.
Inspect the equipment and accessories for
transport damage.
If possible, please keep the packaging until the
end of the guarantee period.
IMPORTANT
The equipment and packaging material are not
toys. Do not let children play with plastic bags,
foils or small parts. There is a danger of
swallowing or suffocating!
Original operating instructions

4. Intended use

Range of applications:
For irrigating and watering landscaped areas,
vegetable beds and gardens
For operating lawn sprinklers
For drawing water from ponds, streams,
rainwater butts, rainwater cisterns and springs
For supplying service water
Transport media:
For the pumping of clear water (fresh water),
rainwater or light suds/service water.
The maximum temperature of the fluid must not
exceed +35°C if the machine is operated
permanently.
Do not use the equipment to pump inflammable,
gassing or explosive fluids.
12
21.07.2010 8:16 Uhr Seite 12
The pumping of aggressive liquids (acids, alkalis, silo
seepage etc.) as well as liquids with abrasive
substances (sand) must likewise be avoided.
This equipment is not designed to convey drinking
water.
The equipment may only be used for the tasks it is
designed to handle. Any other use is deemed to be a
case of misuse. The user/operator and not the
manufacturer will be liable for any damage or injuries
of any kind caused as a result of this.
Please note that our equipment has not been
designed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
equipment is used in commercial, trade or industrial
businesses or for equivalent purposes.

5. Technical data

Mains connection:
Power rating:
Max. pumping rate:
Pumping rate at 2 bar:
Max. pump pressure:
Max. suction height
Pressure and suction connector:
Max. water temperature:
Vessel volume:
Approx. cut-in pressure:
Approx. cut-out pressure:
Protection class:
Protection type:
Weight:

6. Electrical connections

The electrical connection needs a shook-proof
socket with 230 V ~ 50 Hz. Fusing at least 10
amps. Please ensure that the power socket is
easily accessible.
The motor is protected from overload or
blockage by a built-in temperature monitor. In
case of overheating the temperature monitor
automatically switches the pump off. After the
equipment has cooled down, the pump will
switch on again automatically.
230V ~ 50 Hz
1100 W
3,600 l/h
2,750 l/h
0.45 MPa (4.5 bar)
8 m
33.3 mm (R1IG)
35°C
19.2 l
0.15 MPa (1.5 bar)
0.3 MPa (3 bar)
I
IPX4
16 kg