Safety Information - EINHELL BG-WW 1136 Originalbetriebsanleitung

Anleitung_BG_WW_1136_SPK7:_
Before you put the home waterworks into operation,
carefully read the following safety regulations and the
operating instructions.
If you give the equipment to any other persons, give
them the operating instructions as well.
Keep these instructions in a safe place.
Packaging:
Your equipment is packaged to protect it from
damage in transit.
Packaging is raw material and can therefore be
reused or returned to the raw material system.

1. Safety information

Caution!
In stagnant water bodies, garden ponds,
swimming ponds and their surrounding areas the
equipment may only be used with an earth-
leakage circuit breaker with an actuating rated
current of up to 30 mA (according to VDE 0100
Part 702 and 738).
The equipment is not designed for use in
swimming pools and paddling pools of any kind
or other bodies of water in which people or
animals may be present during operation. It is
prohibited to operate the equipment if a person
or animal is in the danger area. Ask your
electrician!
This equipment is not designed to be used by
people (including children) with limited physical,
sensory or mental capacities or those with no
experience and/or knowledge unless they are
supervised by a person who is responsible for
their safety or they have received instructions
from such a person in how to use the equipment
safely. Children must always be supervised in
order to ensure that they do not play with the
equipment.
Keep the packing films out of the reach of babies
and children.
Danger of suffocation!
The operator is responsible for the safety of third
parties present in the work area.
Before starting, a test must be carried out by a
specialist to ensure that the required electrical
safety measures are in place.
Always inspect the equipment visually before
using it. Do not use the equipment if safety
devices are damaged or worn. Never disable
safety devices.
21.07.2010 8:16 Uhr Seite 11
Use the equipment only for the purposes
indicated in these operating instructions.
You are responsible for safety in the work area.
If the power cable for this machine is damaged, it
must be replaced by the manufacturer or its
after-sales service or similarly trained personnel
to avoid danger.
The voltage of 230 V alternating voltage
specified on the rating plate of the pump must be
the same as the mains voltage.
Never use the power cable to lift, transport or
secure the pump.
Ensure that the electrical plug connections are in
areas that are not at risk of flooding or protect
them from moisture.
Always pull out the power plug before doing any
work on the pump!
Do not expose the pump to a direct jet of water.
The operator is responsible for complying with
local safety and installation regulations (ask an
electrician if you are in any doubt).
Consequential damage caused by flooded rooms
in the event of the pump suffering faults must be
prevented by the user by means of suitable
measures (for example installing alarm systems
or a reserve pump, etc.).
In the event of a failure of the pump, repair work
may only be carried out by an electrician or by
ISC after sales service personnel.
Use only original spare parts.
The pump must never run dry or be used when
the intake line is closed fully. The manufacturerʼs
warranty does not cover damage caused to the
pump as a result of running it dry.
The pump must not be used to operate
swimming pools.
The pump must not be installed in the drinking
water pipe line.
CAUTION
Read all safety regulations and instructions. Any
errors made in following the safety information and
instructions may result in an electric shock, fire
and/or serious injury.
Keep all safety information and instructions in a
safe place for future use.
GB
11