Herunterladen Inhalt Inhalt Diese Seite drucken

Safety Regulations; Layout And Items Supplied - EINHELL GE-DP 6935 ECO Originalbetriebsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
Danger!
When using the equipment, a few safety pre-
cautions must be observed to avoid injuries and
damage. Please read the complete operating
instructions and safety regulations with due care.
Keep this manual in a safe place, so that the in-
formation is available at all times. If you give the
equipment to any other person, hand over these
operating instructions and safety regulations as
well. We cannot accept any liability for damage
or accidents which arise due to a failure to follow
these instructions and the safety instructions.

1. Safety regulations

Danger!
Read all safety regulations and instructions.
Any errors made in following the safety regula-
tions and instructions may result in an electric
shock, fi re and/or serious injury.
Keep all safety regulations and instructions
in a safe place for future use.
Danger!
The pump must be powered via an
earth-leakage circuit breaker (RCD)
with a rated fault current of no more
than 30 mA (according to VDE 0100
Part 702 and 738).
The equipment is not designed for use in
swimming pools and paddling pools of any
kind or other bodies of water in which people
or animals may be present during operation.
It is prohibited to operate the equipment if a
person or animal is in the danger area. Ask
your electrician!
Before you put the equipment into
operation, arrange for a specialist to
check that the earthing, protective
multiple earthing or residual-current
operated circuit-breaker circuit com-
ply with the safety regulations of the
power supply company and work
correctly.
The electrical plug-in connections
must be protected from wet condi-
tions.
Anl_GE_DP_6935_ECO_SPK7.indb 16
Anl_GE_DP_6935_ECO_SPK7.indb 16
GB
If there is a risk of flooding, place the
plug-in connections in an area which
is safe from flooding.
Strictly avoid pumping aggressive
liquids and abrasive substances.
Protect the equipment from frost.
Protect the equipment from dry run-
ning.
Take suitable measures to keep the
equipment out of the reach of child-
ren.
The water may be contaminated by
escaping lubricating oil/lubricant.
If the power cable for this equipment
is damaged, it must be replaced by
the manufacturer or its after-sales
service or similarly trained person-
nel to avoid danger.

2. Layout and items supplied

2.1 Layout (Fig. 1/2)
1. Universal hose connection
2. Floating switch
3. Screw for height adjustment
4. Intake cage
5. Integral cable store
6. Handle
7. Suspension eyelet
2.2 Items supplied
Please check that the article is complete as
specifi ed in the scope of delivery. If parts are
missing, please contact our service center or the
sales outlet where you made your purchase at
the latest within 5 working days after purchasing
the product and upon presentation of a valid bill
of purchase. Also, refer to the warranty table in
the service information at the end of the operating
instructions.
Open the packaging and take out the equip-
ment with care.
Remove the packaging material and any
packaging and/or transportation braces (if
available).
Check to see if all items are supplied.
Inspect the equipment and accessories for
transport damage.
- 16 -
09.08.2019 08:27:16
09.08.2019 08:27:16

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

41.707.20

Inhaltsverzeichnis