Safety Information - EINHELL 41.766.50 Bedienungsanleitung

Anleitung_ED_Schalter_SPK1:_
Important!
When using equipment, a few safety precautions
must be observed to avoid injuries and damage.
Please read the complete operating manual with due
care. Keep this manual in a safe place, so that the
information is available at all times. If you give the
equipment to any other person, give them these
operating instructions as well.
We accept no liability for damage or accidents which
arise due to non-observance of these instructions
and the safety information.

1. Safety information

This equipment is not designed to be used by people
(including children) with limited physical, sensory or
mental capacities or those with no experience and/or
knowledge unless they are supervised by a person
who is responsible for their safety or they have
received instructions from such a person in how to
use the equipment safely. Children must always be
supervised in order to ensure that they do not play
with the equipment.
Please read the directions for use carefully and
observe the information provided. It is important
to consult these instructions in order to acquaint
yourself with the machine, its proper use and
safety precautions.
Suitable measures must be taken to keep the
equipment out of the reach of children.
The operator is responsible for the safety of third
parties present in the work area.
Before starting, a test must be carried out by a
specialist to ensure that the required electrical
safety measures are in place.
There must be no personnel in the transport
medium while the pump is operating.
Caution! In stagnant water, garden ponds,
swimming ponds and their surrounding areas the
pump may only be used with an earth-leakage
circuit breaker with an actuating rated current of
up to 30mA (according to VDE 0100 part 702
and 738).
Always inspect the equipment visually before
using it. Do not use the equipment if safety
devices are damaged or worn. Never disable
safety devices.
Use the equipment only for the purposes
indicated in these directions for use.
You are responsible for safety in the work area.
If the plug is damaged by external influences, the
cable may not be repaired. The cable must be
replaced by a new one. This work may only be
carried out by a trained electrician.
23.09.2008 15:26 Uhr Seite 7
The voltage of 230 V alternating voltage
specified on the rating plate must be the same as
the mains voltage.
Ensure that the electrical plug connections are in
areas that are not at risk of flooding or protect
them from moisture.
Pull the mains plug before starting any work on
the equipment.
Do not expose the equipment to a direct jet of
water.
The operator is responsible for complying with
local safety and installation regulations (ask an
electrician if you are in any doubt).
Consequential damage caused by flooded rooms
in the event of the pump suffering faults must be
prevented by the user by means of suitable
measures (for example installing alarm systems
or a reserve pump, etc.).
In the event of a failure, repair work may only be
carried out by an electrician or by ISC after sales
service personnel.
2. Layout and items supplied
(see Fig. 1)
Flow switch (1)
Socket (2)
Mains lead (3)
Connection adapter (4)
Any pumps shown are for illustration purposes only
and are not supplied.
3. Proper use
Suitable for use for the domestic water supply in a
house or garden. Ideal for converting irrigation
pumps into an automatic domestic water system.
The electronic flow switch with dry running guard
switches on the pump automatically when water is
needed. When the water supply has been stopped,
the pump switches off again. Easy to fit to any
garden pump with a 1" connector. Easy to connect
due to its ready-fitted mains lead and socket.
Please note that our equipment has not been
designed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
GB
7