Herunterladen Inhalt Inhalt Diese Seite drucken

Olivetti LAB 650 Anwenderhandbuch Seite 123

Ink-jet faz
Vorschau ausblenden Andere Handbücher für LAB 650:
Inhaltsverzeichnis

Werbung

EG
-KONFORMITÄTSERKLÄRUNG des HERSTELLERS gemäß ISO/IEC 17050
MANUFACTURER'S CE DECLARATION of CONFORMITY according to ISO/IEC 17050
OLIVETTI S.p.A.
Erklärt in eigener Verantwortung, dass:
Declares under its sole responsibility that:
das in diesem Handbuch beschriebene Produkt
the product described in this guide
KONFORM IST mit der Richtlinie 1999/5/CE vom 9 März 1999
is IN COMPLIANCE with directive 99/5/EC dated 9
und den wesentlichen Anforderungen der Elektromagnetischen Kompatibilität und Elektrischen Sicherheit
entspricht, die durch folgende Richtlinien vorgeschrieben werden:
fulfills the essential requirements of Electromagnetic Compatibility and of Electrical Safety as prescribed by the
Directives:
2004/108/EG vom 15. Dezember 2004;
th
2004/108/EC dated 15
December 2004;
2006/95/EG vom 27. Dezember 2006;
th
2006/95/EC dated 27
December 2006;
da entsprechend der folgenden Harmonisierten Normen geplant und hergestellt:
since designed and manufactured in compliance with the following European Harmonized Standards:
EN 55022 : 2006 (Limits and methods of measurements of radio interference characteristics of Information
Technology Equipment) / Class B;
EN 61000-3-2 : 2005 (Electromagnetic Compatibility (EMC) - Part 2: Limits - Section 2: Limits for harmonic
current emissions (equipment input current
EN 61000-3-3/A1 : 2002 (Electromagnetic Compatibility (EMC) - Part 3: Limits - Section 3: Limitation of
voltage fluctuations and flicker in low voltage supply systems for equipment with rated current up to and
including 16A);
EN 55024/A2 : 2003 (Electromagnetic Compatibility - Information technology equipment - Immunity
characteristics - Limits and methods of measurement);
EN 60950-1 : 2006 (Safety of Information Technology Equipment, including electrical business equipment).
und außerdem folgenden Normen entspricht:
Moreover the product is in compliance with following Standards:
ETSI TBR 38: May 1998 (Requirements for a terminal equipment incorporating an analogue handset function
capable of supporting the justified case service when connected to the analogue interface of the PSTN in
Europe);
ETSI ES 203 021: January 2006 Access and Terminal (AT); Harmonized basic attachment requirements for
Terminals for connection to analogue interfaces of the Telephone Networks.
Die Konformität zu den oben genannten wesentlichen Anforderungen wird durch die Anbringung der Marke EG
auf dem Produkt bestätigt.
Compliance with the above mentioned essential requirements is shown by affixing the CE marking on the product.
Scarmagno, 08. Juni 2008
th
Scarmagno, 8
June 2008
Hinweise: 1) Die Marke CE wurde 2008 angebracht.
Notes:
1) CE Marking has been affixed in 2008.
2) Das Qualitätssystem entspricht dem Serienstandard UNI EN ISO 9000.
2) The Quality System is in compliance with the UNI EN ISO 9000 series of Standards.
Olivetti S.p.A. Sede Sociale Ivrea, Via Jervis, 77 - Cap. Soc. Euro 154.000.000 - C.C.I.A.A. Torino n. 547040 - Trib. Ivrea Reg. Soc. n.1927 - Cod. Fisc. e Part. IVA 02298700010
Via Jervis, 77 - IVREA (TO) - ITALY
16 A per phase);
th
march 1999
Olivetti S.p.A.

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Lab 680

Inhaltsverzeichnis