Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Step 5: Install the Saddle, Seat Back Cushion
and the Back Handlebar
• Saddle (78) is mounted to Seat adjust-
ing Metal (3) using Nylon nut M8 (40) and
Washer (31).
• Align Bolt (28) with hole of Rear Handlebar
Set (76), through Washer (24) and tighten
securely.
• Align Bolt (19) with the hole of assembled
seat back cushion(79), through Washer
• (24) and Nylon Nut (40) and tighten securely.
• Back rest is connected with the seat tightly
through Nylon Nut (40),Washer (31) and
Bolt (17)
Step 6: Install the Seat Post to the Main frame
• Attach the seat post to the main frame , choose a suitable
height,and then fasten the seat adjusting knob(65)
• Note: When adjusting the height of seat post, the maximum
insert depth of mark line cannot be higher than the edge of
bushing.
Time (TIME)
Speed (SPD)
Distance (DIST)
Calorie (CAL)
Odometer (ODO)
Pulse (PUL)
Key Functions
MODE/SELECT/RESET
SET
RESET
17
Operation
This key lets you to select and lock on to a particular function you want.
Can to proceed the data establish for "TIME" "DISTANCE" "CALORIES".
The key to reset the value to zero by pressing the key.
00:00 - 99:59
0 - 99.9 km/h (mph)
0 - 999.9 km (mi)
0 - 9999 kcal
0 - 999.9 km (mi)
40 - 240 BPM
Werbung
Inhaltsverzeichnis
