Klarfit 10026815 Bedienungsanleitung Seite 18

Operation Procedures
1. AUTO ON/OFF
The system turns on when any key is pressed or when it sensor an input from the speed sensor.
The system turns off automatically when the speed has no signal input or on key are pressed
for approximately 4 minutes.
2. RESET
The unit can be reset by either changing battery or pressing the MODE key for 3 seconds.
3. MODE
To choose the SCAN or LOCK if you do not want the scan mode, press the MODE key when the
pointer on the function you want which begins blinking.
Functions:
TIME:
Press the MODE key until pointer lock on to TIME. The total working me will be shown when starting
exercise.
SPEED:
Press the MODE key until the pointer advanced to SPEED. The current speed will be shown.
DISTANCE:
Press the MODE key until the pointer advanced to DISTANCE. The distance of each workout will be
displayed.
CALORIE:
Press the MODE key until pointer lock on to CALORIE. The calorie burned will be displayed when
displayed will be shown.
ODOMETER (IF HAVE):
Press the MODE key until the pointer advanced to ODEMETER. The total accumulated distance will
be shown.
PULSE (IF HAVE):
Press the MODE key until the pointer advance to PULSE, User's current heart rate will be displayed in
beats per minute.Place the palms of your hands on both of the contact parts(or put ear-clip to ear),
and wait for 30 seconds for the most accurate reading.
SCAN:
Automatically display changes every 4 seconds.
BATTERY:
If improper display on monitor, please reinstall the batteries to have a good result.
18