Klarfit 10026815 Bedienungsanleitung Seite 16

Step 2: Install the front and rear stabilizer
Install front and Rear Stabilizer(5),(8) to
Main Frame(1). Tighten hex nuts securely.
Rear stabilizer has transport wheels.
But you can use front or rear based
on your preference.
Step 3: Install the handlebar
and computer
• Attach Handle Bar (4) to Main Frame (1) by
installing Bolt (28) and Washer (24) with holes
and tighten
• Insert Computer(11) to table board and align
with Screw (22) and tighten with wrench
• Connect the Speed Connecting Line (74) and
the Pulse Connecting
• Line (75) to back of the Cumputer (11)
Step 4: Install the Left and Right Pedal
• Note: Left Pedal installs counter clockwise.
Install by rotating to LEFT. Use care that Pedal
Shaft is Perpendicular to Crank Shaft. Use sup-
plied wrench to tighten. Check pedals often for
tightness when new.
• Note: Crank arms should be checked for tight-
ness using 14mm socket after first couple hours
of use.
16